Package io.envoyproxy.envoy.config.filter.network.http_connection_manager.v2

Interface HttpConnectionManagerOrBuilder

All Superinterfaces:
com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder
All Known Implementing Classes:
HttpConnectionManager, HttpConnectionManager.Builder
public interface HttpConnectionManagerOrBuilder extends com.google.protobuf.MessageOrBuilder

  • Method Summary

    Modifier and Type
    Method
    Description
    AccessLog
    getAccessLog(int index)
    Configuration for :ref:`HTTP access logs <arch_overview_access_logs>` emitted by the connection manager.
    int
    getAccessLogCount()
    Configuration for :ref:`HTTP access logs <arch_overview_access_logs>` emitted by the connection manager.
    List<AccessLog>
    getAccessLogList()
    Configuration for :ref:`HTTP access logs <arch_overview_access_logs>` emitted by the connection manager.
    AccessLogOrBuilder
    getAccessLogOrBuilder(int index)
    Configuration for :ref:`HTTP access logs <arch_overview_access_logs>` emitted by the connection manager.
    List<? extends AccessLogOrBuilder>
    getAccessLogOrBuilderList()
    Configuration for :ref:`HTTP access logs <arch_overview_access_logs>` emitted by the connection manager.
    com.google.protobuf.BoolValue
    getAddUserAgent()
    Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent` and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers.
    com.google.protobuf.BoolValueOrBuilder
    getAddUserAgentOrBuilder()
    Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent` and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers.
    HttpConnectionManager.CodecType
    getCodecType()
    Supplies the type of codec that the connection manager should use.
    int
    getCodecTypeValue()
    Supplies the type of codec that the connection manager should use.
    HttpProtocolOptions
    getCommonHttpProtocolOptions()
    Additional settings for HTTP requests handled by the connection manager.
    HttpProtocolOptionsOrBuilder
    getCommonHttpProtocolOptionsOrBuilder()
    Additional settings for HTTP requests handled by the connection manager.
    com.google.protobuf.Duration
    getDelayedCloseTimeout()
    The delayed close timeout is for downstream connections managed by the HTTP connection manager.
    com.google.protobuf.DurationOrBuilder
    getDelayedCloseTimeoutOrBuilder()
    The delayed close timeout is for downstream connections managed by the HTTP connection manager.
    com.google.protobuf.Duration
    getDrainTimeout()
    The time that Envoy will wait between sending an HTTP/2 “shutdown notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
    com.google.protobuf.DurationOrBuilder
    getDrainTimeoutOrBuilder()
    The time that Envoy will wait between sending an HTTP/2 “shutdown notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
    HttpConnectionManager.ForwardClientCertDetails
    getForwardClientCertDetails()
    How to handle the :ref:`config_http_conn_man_headers_x-forwarded-client-cert` (XFCC) HTTP header.
    int
    getForwardClientCertDetailsValue()
    How to handle the :ref:`config_http_conn_man_headers_x-forwarded-client-cert` (XFCC) HTTP header.
    com.google.protobuf.BoolValue
    getGenerateRequestId()
    Whether the connection manager will generate the :ref:`x-request-id <config_http_conn_man_headers_x-request-id>` header if it does not exist.
    com.google.protobuf.BoolValueOrBuilder
    getGenerateRequestIdOrBuilder()
    Whether the connection manager will generate the :ref:`x-request-id <config_http_conn_man_headers_x-request-id>` header if it does not exist.
    Http2ProtocolOptions
    getHttp2ProtocolOptions()
    Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
    Http2ProtocolOptionsOrBuilder
    getHttp2ProtocolOptionsOrBuilder()
    Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
    HttpFilter
    getHttpFilters(int index)
    A list of individual HTTP filters that make up the filter chain for requests made to the connection manager.
    int
    getHttpFiltersCount()
    A list of individual HTTP filters that make up the filter chain for requests made to the connection manager.
    List<HttpFilter>
    getHttpFiltersList()
    A list of individual HTTP filters that make up the filter chain for requests made to the connection manager.
    HttpFilterOrBuilder
    getHttpFiltersOrBuilder(int index)
    A list of individual HTTP filters that make up the filter chain for requests made to the connection manager.
    List<? extends HttpFilterOrBuilder>
    getHttpFiltersOrBuilderList()
    A list of individual HTTP filters that make up the filter chain for requests made to the connection manager.
    Http1ProtocolOptions
    getHttpProtocolOptions()
    Additional HTTP/1 settings that are passed to the HTTP/1 codec.
    Http1ProtocolOptionsOrBuilder
    getHttpProtocolOptionsOrBuilder()
    Additional HTTP/1 settings that are passed to the HTTP/1 codec.
    com.google.protobuf.Duration
    getIdleTimeout()
    Deprecated.
    envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.idle_timeout is deprecated.
    com.google.protobuf.DurationOrBuilder
    getIdleTimeoutOrBuilder()
    Deprecated.
    HttpConnectionManager.InternalAddressConfig
    getInternalAddressConfig()
    Configures what network addresses are considered internal for stats and header sanitation purposes.
    HttpConnectionManager.InternalAddressConfigOrBuilder
    getInternalAddressConfigOrBuilder()
    Configures what network addresses are considered internal for stats and header sanitation purposes.
    com.google.protobuf.UInt32Value
    getMaxRequestHeadersKb()
    The maximum request headers size for incoming connections.
    com.google.protobuf.UInt32ValueOrBuilder
    getMaxRequestHeadersKbOrBuilder()
    The maximum request headers size for incoming connections.
    boolean
    getMergeSlashes()
    Determines if adjacent slashes in the path are merged into one before any processing of requests by HTTP filters or routing.
    com.google.protobuf.BoolValue
    getNormalizePath()
    Should paths be normalized according to RFC 3986 before any processing of requests by HTTP filters or routing?
    com.google.protobuf.BoolValueOrBuilder
    getNormalizePathOrBuilder()
    Should paths be normalized according to RFC 3986 before any processing of requests by HTTP filters or routing?
    boolean
    getPreserveExternalRequestId()
    Whether the connection manager will keep the :ref:`x-request-id <config_http_conn_man_headers_x-request-id>` header if passed for a request that is edge (Edge request is the request from external clients to front Envoy) and not reset it, which is the current Envoy behaviour.
    boolean
    getProxy100Continue()
    If proxy_100_continue is true, Envoy will proxy incoming "Expect: 100-continue" headers upstream, and forward "100 Continue" responses downstream.
    Rds
    getRds()
    The connection manager’s route table will be dynamically loaded via the RDS API.
    RdsOrBuilder
    getRdsOrBuilder()
    The connection manager’s route table will be dynamically loaded via the RDS API.
    boolean
    getRepresentIpv4RemoteAddressAsIpv4MappedIpv6()
    If :ref:`use_remote_address <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.use_remote_address>` is true and represent_ipv4_remote_address_as_ipv4_mapped_ipv6 is true and the remote address is an IPv4 address, the address will be mapped to IPv6 before it is appended to *x-forwarded-for*.
    RequestIDExtension
    getRequestIdExtension()
    The configuration of the request ID extension.
    RequestIDExtensionOrBuilder
    getRequestIdExtensionOrBuilder()
    The configuration of the request ID extension.
    com.google.protobuf.Duration
    getRequestTimeout()
    The amount of time that Envoy will wait for the entire request to be received.
    com.google.protobuf.DurationOrBuilder
    getRequestTimeoutOrBuilder()
    The amount of time that Envoy will wait for the entire request to be received.
    RouteConfiguration
    getRouteConfig()
    The route table for the connection manager is static and is specified in this property.
    RouteConfigurationOrBuilder
    getRouteConfigOrBuilder()
    The route table for the connection manager is static and is specified in this property.
    HttpConnectionManager.RouteSpecifierCase
    getRouteSpecifierCase()
     
    ScopedRoutes
    getScopedRoutes()
    A route table will be dynamically assigned to each request based on request attributes (e.g., the value of a header).
    ScopedRoutesOrBuilder
    getScopedRoutesOrBuilder()
    A route table will be dynamically assigned to each request based on request attributes (e.g., the value of a header).
    HttpConnectionManager.ServerHeaderTransformation
    getServerHeaderTransformation()
    Defines the action to be applied to the Server header on the response path.
    int
    getServerHeaderTransformationValue()
    Defines the action to be applied to the Server header on the response path.
    String
    getServerName()
    An optional override that the connection manager will write to the server header in responses.
    com.google.protobuf.ByteString
    getServerNameBytes()
    An optional override that the connection manager will write to the server header in responses.
    HttpConnectionManager.SetCurrentClientCertDetails
    getSetCurrentClientCertDetails()
    This field is valid only when :ref:`forward_client_cert_details <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>` is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS.
    HttpConnectionManager.SetCurrentClientCertDetailsOrBuilder
    getSetCurrentClientCertDetailsOrBuilder()
    This field is valid only when :ref:`forward_client_cert_details <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>` is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS.
    boolean
    getSkipXffAppend()
    If set, Envoy will not append the remote address to the :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header.
    String
    getStatPrefix()
    The human readable prefix to use when emitting statistics for the connection manager.
    com.google.protobuf.ByteString
    getStatPrefixBytes()
    The human readable prefix to use when emitting statistics for the connection manager.
    com.google.protobuf.Duration
    getStreamIdleTimeout()
    The stream idle timeout for connections managed by the connection manager.
    com.google.protobuf.DurationOrBuilder
    getStreamIdleTimeoutOrBuilder()
    The stream idle timeout for connections managed by the connection manager.
    HttpConnectionManager.Tracing
    getTracing()
    Presence of the object defines whether the connection manager emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider <envoy_api_msg_config.trace.v2.Tracing>`.
    HttpConnectionManager.TracingOrBuilder
    getTracingOrBuilder()
    Presence of the object defines whether the connection manager emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider <envoy_api_msg_config.trace.v2.Tracing>`.
    HttpConnectionManager.UpgradeConfig
    getUpgradeConfigs(int index)
    repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;
    int
    getUpgradeConfigsCount()
    repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;
    List<HttpConnectionManager.UpgradeConfig>
    getUpgradeConfigsList()
    repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;
    HttpConnectionManager.UpgradeConfigOrBuilder
    getUpgradeConfigsOrBuilder(int index)
    repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;
    List<? extends HttpConnectionManager.UpgradeConfigOrBuilder>
    getUpgradeConfigsOrBuilderList()
    repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;
    com.google.protobuf.BoolValue
    getUseRemoteAddress()
    If set to true, the connection manager will use the real remote address of the client connection when determining internal versus external origin and manipulating various headers.
    com.google.protobuf.BoolValueOrBuilder
    getUseRemoteAddressOrBuilder()
    If set to true, the connection manager will use the real remote address of the client connection when determining internal versus external origin and manipulating various headers.
    String
    getVia()
    Via header value to append to request and response headers.
    com.google.protobuf.ByteString
    getViaBytes()
    Via header value to append to request and response headers.
    int
    getXffNumTrustedHops()
    The number of additional ingress proxy hops from the right side of the :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header to trust when determining the origin client's IP address.
    boolean
    hasAddUserAgent()
    Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent` and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers.
    boolean
    hasCommonHttpProtocolOptions()
    Additional settings for HTTP requests handled by the connection manager.
    boolean
    hasDelayedCloseTimeout()
    The delayed close timeout is for downstream connections managed by the HTTP connection manager.
    boolean
    hasDrainTimeout()
    The time that Envoy will wait between sending an HTTP/2 “shutdown notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
    boolean
    hasGenerateRequestId()
    Whether the connection manager will generate the :ref:`x-request-id <config_http_conn_man_headers_x-request-id>` header if it does not exist.
    boolean
    hasHttp2ProtocolOptions()
    Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
    boolean
    hasHttpProtocolOptions()
    Additional HTTP/1 settings that are passed to the HTTP/1 codec.
    boolean
    hasIdleTimeout()
    Deprecated.
    envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.idle_timeout is deprecated.
    boolean
    hasInternalAddressConfig()
    Configures what network addresses are considered internal for stats and header sanitation purposes.
    boolean
    hasMaxRequestHeadersKb()
    The maximum request headers size for incoming connections.
    boolean
    hasNormalizePath()
    Should paths be normalized according to RFC 3986 before any processing of requests by HTTP filters or routing?
    boolean
    hasRds()
    The connection manager’s route table will be dynamically loaded via the RDS API.
    boolean
    hasRequestIdExtension()
    The configuration of the request ID extension.
    boolean
    hasRequestTimeout()
    The amount of time that Envoy will wait for the entire request to be received.
    boolean
    hasRouteConfig()
    The route table for the connection manager is static and is specified in this property.
    boolean
    hasScopedRoutes()
    A route table will be dynamically assigned to each request based on request attributes (e.g., the value of a header).
    boolean
    hasSetCurrentClientCertDetails()
    This field is valid only when :ref:`forward_client_cert_details <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>` is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS.
    boolean
    hasStreamIdleTimeout()
    The stream idle timeout for connections managed by the connection manager.
    boolean
    hasTracing()
    Presence of the object defines whether the connection manager emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider <envoy_api_msg_config.trace.v2.Tracing>`.
    boolean
    hasUseRemoteAddress()
    If set to true, the connection manager will use the real remote address of the client connection when determining internal versus external origin and manipulating various headers.

    Methods inherited from interface com.google.protobuf.MessageLiteOrBuilder

    isInitialized

    Methods inherited from interface com.google.protobuf.MessageOrBuilder

    findInitializationErrors, getAllFields, getDefaultInstanceForType, getDescriptorForType, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

  • Method Details

    • getCodecTypeValue

      int getCodecTypeValue()
       Supplies the type of codec that the connection manager should use.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.CodecType codec_type = 1 [(.validate.rules) = { ... }
      Returns:
      The enum numeric value on the wire for codecType.

    • getCodecType

      HttpConnectionManager.CodecType getCodecType()
       Supplies the type of codec that the connection manager should use.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.CodecType codec_type = 1 [(.validate.rules) = { ... }
      Returns:
      The codecType.

    • getStatPrefix

      String getStatPrefix()
       The human readable prefix to use when emitting statistics for the
 connection manager. See the :ref:`statistics documentation <config_http_conn_man_stats>` for
 more information.
      string stat_prefix = 2 [(.validate.rules) = { ... }
      Returns:
      The statPrefix.

    • getStatPrefixBytes

      com.google.protobuf.ByteString getStatPrefixBytes()
       The human readable prefix to use when emitting statistics for the
 connection manager. See the :ref:`statistics documentation <config_http_conn_man_stats>` for
 more information.
      string stat_prefix = 2 [(.validate.rules) = { ... }
      Returns:
      The bytes for statPrefix.

    • hasRds

      boolean hasRds()
       The connection manager’s route table will be dynamically loaded via the RDS API.
      .envoy.config.filter.network.http_connection_manager.v2.Rds rds = 3;
      Returns:
      Whether the rds field is set.

    • getRds

      Rds getRds()
       The connection manager’s route table will be dynamically loaded via the RDS API.
      .envoy.config.filter.network.http_connection_manager.v2.Rds rds = 3;
      Returns:
      The rds.

    • getRdsOrBuilder

      RdsOrBuilder getRdsOrBuilder()
       The connection manager’s route table will be dynamically loaded via the RDS API.
      .envoy.config.filter.network.http_connection_manager.v2.Rds rds = 3;

    • hasRouteConfig

      boolean hasRouteConfig()
       The route table for the connection manager is static and is specified in this property.
      .envoy.api.v2.RouteConfiguration route_config = 4;
      Returns:
      Whether the routeConfig field is set.

    • getRouteConfig

      RouteConfiguration getRouteConfig()
       The route table for the connection manager is static and is specified in this property.
      .envoy.api.v2.RouteConfiguration route_config = 4;
      Returns:
      The routeConfig.

    • getRouteConfigOrBuilder

      RouteConfigurationOrBuilder getRouteConfigOrBuilder()
       The route table for the connection manager is static and is specified in this property.
      .envoy.api.v2.RouteConfiguration route_config = 4;

    • hasScopedRoutes

      boolean hasScopedRoutes()
       A route table will be dynamically assigned to each request based on request attributes
 (e.g., the value of a header). The "routing scopes" (i.e., route tables) and "scope keys" are
 specified in this message.
      .envoy.config.filter.network.http_connection_manager.v2.ScopedRoutes scoped_routes = 31;
      Returns:
      Whether the scopedRoutes field is set.

    • getScopedRoutes

      ScopedRoutes getScopedRoutes()
       A route table will be dynamically assigned to each request based on request attributes
 (e.g., the value of a header). The "routing scopes" (i.e., route tables) and "scope keys" are
 specified in this message.
      .envoy.config.filter.network.http_connection_manager.v2.ScopedRoutes scoped_routes = 31;
      Returns:
      The scopedRoutes.

    • getScopedRoutesOrBuilder

      ScopedRoutesOrBuilder getScopedRoutesOrBuilder()
       A route table will be dynamically assigned to each request based on request attributes
 (e.g., the value of a header). The "routing scopes" (i.e., route tables) and "scope keys" are
 specified in this message.
      .envoy.config.filter.network.http_connection_manager.v2.ScopedRoutes scoped_routes = 31;

    • getHttpFiltersList

      List<HttpFilter> getHttpFiltersList()
       A list of individual HTTP filters that make up the filter chain for
 requests made to the connection manager. :ref:`Order matters <arch_overview_http_filters_ordering>`
 as the filters are processed sequentially as request events happen.
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpFilter http_filters = 5;

    • getHttpFilters

      HttpFilter getHttpFilters(int index)
       A list of individual HTTP filters that make up the filter chain for
 requests made to the connection manager. :ref:`Order matters <arch_overview_http_filters_ordering>`
 as the filters are processed sequentially as request events happen.
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpFilter http_filters = 5;

    • getHttpFiltersCount

      int getHttpFiltersCount()
       A list of individual HTTP filters that make up the filter chain for
 requests made to the connection manager. :ref:`Order matters <arch_overview_http_filters_ordering>`
 as the filters are processed sequentially as request events happen.
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpFilter http_filters = 5;

    • getHttpFiltersOrBuilderList

      List<? extends HttpFilterOrBuilder> getHttpFiltersOrBuilderList()
       A list of individual HTTP filters that make up the filter chain for
 requests made to the connection manager. :ref:`Order matters <arch_overview_http_filters_ordering>`
 as the filters are processed sequentially as request events happen.
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpFilter http_filters = 5;

    • getHttpFiltersOrBuilder

      HttpFilterOrBuilder getHttpFiltersOrBuilder(int index)
       A list of individual HTTP filters that make up the filter chain for
 requests made to the connection manager. :ref:`Order matters <arch_overview_http_filters_ordering>`
 as the filters are processed sequentially as request events happen.
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpFilter http_filters = 5;

    • hasAddUserAgent

      boolean hasAddUserAgent()
       Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent`
 and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers. See the linked
 documentation for more information. Defaults to false.
      .google.protobuf.BoolValue add_user_agent = 6;
      Returns:
      Whether the addUserAgent field is set.

    • getAddUserAgent

      com.google.protobuf.BoolValue getAddUserAgent()
       Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent`
 and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers. See the linked
 documentation for more information. Defaults to false.
      .google.protobuf.BoolValue add_user_agent = 6;
      Returns:
      The addUserAgent.

    • getAddUserAgentOrBuilder

      com.google.protobuf.BoolValueOrBuilder getAddUserAgentOrBuilder()
       Whether the connection manager manipulates the :ref:`config_http_conn_man_headers_user-agent`
 and :ref:`config_http_conn_man_headers_downstream-service-cluster` headers. See the linked
 documentation for more information. Defaults to false.
      .google.protobuf.BoolValue add_user_agent = 6;

    • hasTracing

      boolean hasTracing()
       Presence of the object defines whether the connection manager
 emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider
 <envoy_api_msg_config.trace.v2.Tracing>`.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.Tracing tracing = 7;
      Returns:
      Whether the tracing field is set.

    • getTracing

      HttpConnectionManager.Tracing getTracing()
       Presence of the object defines whether the connection manager
 emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider
 <envoy_api_msg_config.trace.v2.Tracing>`.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.Tracing tracing = 7;
      Returns:
      The tracing.

    • getTracingOrBuilder

      HttpConnectionManager.TracingOrBuilder getTracingOrBuilder()
       Presence of the object defines whether the connection manager
 emits :ref:`tracing <arch_overview_tracing>` data to the :ref:`configured tracing provider
 <envoy_api_msg_config.trace.v2.Tracing>`.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.Tracing tracing = 7;

    • hasCommonHttpProtocolOptions

      boolean hasCommonHttpProtocolOptions()
       Additional settings for HTTP requests handled by the connection manager. These will be
 applicable to both HTTP1 and HTTP2 requests.
      .envoy.api.v2.core.HttpProtocolOptions common_http_protocol_options = 35;
      Returns:
      Whether the commonHttpProtocolOptions field is set.

    • getCommonHttpProtocolOptions

      HttpProtocolOptions getCommonHttpProtocolOptions()
       Additional settings for HTTP requests handled by the connection manager. These will be
 applicable to both HTTP1 and HTTP2 requests.
      .envoy.api.v2.core.HttpProtocolOptions common_http_protocol_options = 35;
      Returns:
      The commonHttpProtocolOptions.

    • getCommonHttpProtocolOptionsOrBuilder

      HttpProtocolOptionsOrBuilder getCommonHttpProtocolOptionsOrBuilder()
       Additional settings for HTTP requests handled by the connection manager. These will be
 applicable to both HTTP1 and HTTP2 requests.
      .envoy.api.v2.core.HttpProtocolOptions common_http_protocol_options = 35;

    • hasHttpProtocolOptions

      boolean hasHttpProtocolOptions()
       Additional HTTP/1 settings that are passed to the HTTP/1 codec.
      .envoy.api.v2.core.Http1ProtocolOptions http_protocol_options = 8;
      Returns:
      Whether the httpProtocolOptions field is set.

    • getHttpProtocolOptions

      Http1ProtocolOptions getHttpProtocolOptions()
       Additional HTTP/1 settings that are passed to the HTTP/1 codec.
      .envoy.api.v2.core.Http1ProtocolOptions http_protocol_options = 8;
      Returns:
      The httpProtocolOptions.

    • getHttpProtocolOptionsOrBuilder

      Http1ProtocolOptionsOrBuilder getHttpProtocolOptionsOrBuilder()
       Additional HTTP/1 settings that are passed to the HTTP/1 codec.
      .envoy.api.v2.core.Http1ProtocolOptions http_protocol_options = 8;

    • hasHttp2ProtocolOptions

      boolean hasHttp2ProtocolOptions()
       Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
      .envoy.api.v2.core.Http2ProtocolOptions http2_protocol_options = 9;
      Returns:
      Whether the http2ProtocolOptions field is set.

    • getHttp2ProtocolOptions

      Http2ProtocolOptions getHttp2ProtocolOptions()
       Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
      .envoy.api.v2.core.Http2ProtocolOptions http2_protocol_options = 9;
      Returns:
      The http2ProtocolOptions.

    • getHttp2ProtocolOptionsOrBuilder

      Http2ProtocolOptionsOrBuilder getHttp2ProtocolOptionsOrBuilder()
       Additional HTTP/2 settings that are passed directly to the HTTP/2 codec.
      .envoy.api.v2.core.Http2ProtocolOptions http2_protocol_options = 9;

    • getServerName

      String getServerName()
       An optional override that the connection manager will write to the server
 header in responses. If not set, the default is *envoy*.
      string server_name = 10;
      Returns:
      The serverName.

    • getServerNameBytes

      com.google.protobuf.ByteString getServerNameBytes()
       An optional override that the connection manager will write to the server
 header in responses. If not set, the default is *envoy*.
      string server_name = 10;
      Returns:
      The bytes for serverName.

    • getServerHeaderTransformationValue

      int getServerHeaderTransformationValue()
       Defines the action to be applied to the Server header on the response path.
 By default, Envoy will overwrite the header with the value specified in
 server_name.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.ServerHeaderTransformation server_header_transformation = 34 [(.validate.rules) = { ... }
      Returns:
      The enum numeric value on the wire for serverHeaderTransformation.

    • getServerHeaderTransformation

      HttpConnectionManager.ServerHeaderTransformation getServerHeaderTransformation()
       Defines the action to be applied to the Server header on the response path.
 By default, Envoy will overwrite the header with the value specified in
 server_name.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.ServerHeaderTransformation server_header_transformation = 34 [(.validate.rules) = { ... }
      Returns:
      The serverHeaderTransformation.

    • hasMaxRequestHeadersKb

      boolean hasMaxRequestHeadersKb()
       The maximum request headers size for incoming connections.
 If unconfigured, the default max request headers allowed is 60 KiB.
 Requests that exceed this limit will receive a 431 response.
      .google.protobuf.UInt32Value max_request_headers_kb = 29 [(.validate.rules) = { ... }
      Returns:
      Whether the maxRequestHeadersKb field is set.

    • getMaxRequestHeadersKb

      com.google.protobuf.UInt32Value getMaxRequestHeadersKb()
       The maximum request headers size for incoming connections.
 If unconfigured, the default max request headers allowed is 60 KiB.
 Requests that exceed this limit will receive a 431 response.
      .google.protobuf.UInt32Value max_request_headers_kb = 29 [(.validate.rules) = { ... }
      Returns:
      The maxRequestHeadersKb.

    • getMaxRequestHeadersKbOrBuilder

      com.google.protobuf.UInt32ValueOrBuilder getMaxRequestHeadersKbOrBuilder()
       The maximum request headers size for incoming connections.
 If unconfigured, the default max request headers allowed is 60 KiB.
 Requests that exceed this limit will receive a 431 response.
      .google.protobuf.UInt32Value max_request_headers_kb = 29 [(.validate.rules) = { ... }

    • hasIdleTimeout

      @Deprecated boolean hasIdleTimeout()
      Deprecated.
      envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.idle_timeout is deprecated. See envoy/config/filter/network/http_connection_manager/v2/http_connection_manager.proto;l=305
       The idle timeout for connections managed by the connection manager. The
 idle timeout is defined as the period in which there are no active
 requests. If not set, there is no idle timeout. When the idle timeout is
 reached the connection will be closed. If the connection is an HTTP/2
 connection a drain sequence will occur prior to closing the connection.
 This field is deprecated. Use :ref:`idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.common_http_protocol_options>`
 instead.
      .google.protobuf.Duration idle_timeout = 11 [deprecated = true, (.envoy.annotations.disallowed_by_default) = true];
      Returns:
      Whether the idleTimeout field is set.

    • getIdleTimeout

      @Deprecated com.google.protobuf.Duration getIdleTimeout()
      Deprecated.
      envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.idle_timeout is deprecated. See envoy/config/filter/network/http_connection_manager/v2/http_connection_manager.proto;l=305
       The idle timeout for connections managed by the connection manager. The
 idle timeout is defined as the period in which there are no active
 requests. If not set, there is no idle timeout. When the idle timeout is
 reached the connection will be closed. If the connection is an HTTP/2
 connection a drain sequence will occur prior to closing the connection.
 This field is deprecated. Use :ref:`idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.common_http_protocol_options>`
 instead.
      .google.protobuf.Duration idle_timeout = 11 [deprecated = true, (.envoy.annotations.disallowed_by_default) = true];
      Returns:
      The idleTimeout.

    • getIdleTimeoutOrBuilder

      @Deprecated com.google.protobuf.DurationOrBuilder getIdleTimeoutOrBuilder()
      Deprecated.
       The idle timeout for connections managed by the connection manager. The
 idle timeout is defined as the period in which there are no active
 requests. If not set, there is no idle timeout. When the idle timeout is
 reached the connection will be closed. If the connection is an HTTP/2
 connection a drain sequence will occur prior to closing the connection.
 This field is deprecated. Use :ref:`idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.common_http_protocol_options>`
 instead.
      .google.protobuf.Duration idle_timeout = 11 [deprecated = true, (.envoy.annotations.disallowed_by_default) = true];

    • hasStreamIdleTimeout

      boolean hasStreamIdleTimeout()
       The stream idle timeout for connections managed by the connection manager.
 If not specified, this defaults to 5 minutes. The default value was selected
 so as not to interfere with any smaller configured timeouts that may have
 existed in configurations prior to the introduction of this feature, while
 introducing robustness to TCP connections that terminate without a FIN.

 This idle timeout applies to new streams and is overridable by the
 :ref:`route-level idle_timeout
 <envoy_api_field_route.RouteAction.idle_timeout>`. Even on a stream in
 which the override applies, prior to receipt of the initial request
 headers, the :ref:`stream_idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.stream_idle_timeout>`
 applies. Each time an encode/decode event for headers or data is processed
 for the stream, the timer will be reset. If the timeout fires, the stream
 is terminated with a 408 Request Timeout error code if no upstream response
 header has been received, otherwise a stream reset occurs.

 This timeout also specifies the amount of time that Envoy will wait for the peer to open enough
 window to write any remaining stream data once the entirety of stream data (local end stream is
 true) has been buffered pending available window. In other words, this timeout defends against
 a peer that does not release enough window to completely write the stream, even though all
 data has been proxied within available flow control windows. If the timeout is hit in this
 case, the :ref:`tx_flush_timeout <config_http_conn_man_stats_per_codec>` counter will be
 incremented. Note that :ref:`max_stream_duration
 <envoy_api_field_core.HttpProtocolOptions.max_stream_duration>` does not apply to this corner
 case.

 Note that it is possible to idle timeout even if the wire traffic for a stream is non-idle, due
 to the granularity of events presented to the connection manager. For example, while receiving
 very large request headers, it may be the case that there is traffic regularly arriving on the
 wire while the connection manage is only able to observe the end-of-headers event, hence the
 stream may still idle timeout.

 A value of 0 will completely disable the connection manager stream idle
 timeout, although per-route idle timeout overrides will continue to apply.
      .google.protobuf.Duration stream_idle_timeout = 24;
      Returns:
      Whether the streamIdleTimeout field is set.

    • getStreamIdleTimeout

      com.google.protobuf.Duration getStreamIdleTimeout()
       The stream idle timeout for connections managed by the connection manager.
 If not specified, this defaults to 5 minutes. The default value was selected
 so as not to interfere with any smaller configured timeouts that may have
 existed in configurations prior to the introduction of this feature, while
 introducing robustness to TCP connections that terminate without a FIN.

 This idle timeout applies to new streams and is overridable by the
 :ref:`route-level idle_timeout
 <envoy_api_field_route.RouteAction.idle_timeout>`. Even on a stream in
 which the override applies, prior to receipt of the initial request
 headers, the :ref:`stream_idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.stream_idle_timeout>`
 applies. Each time an encode/decode event for headers or data is processed
 for the stream, the timer will be reset. If the timeout fires, the stream
 is terminated with a 408 Request Timeout error code if no upstream response
 header has been received, otherwise a stream reset occurs.

 This timeout also specifies the amount of time that Envoy will wait for the peer to open enough
 window to write any remaining stream data once the entirety of stream data (local end stream is
 true) has been buffered pending available window. In other words, this timeout defends against
 a peer that does not release enough window to completely write the stream, even though all
 data has been proxied within available flow control windows. If the timeout is hit in this
 case, the :ref:`tx_flush_timeout <config_http_conn_man_stats_per_codec>` counter will be
 incremented. Note that :ref:`max_stream_duration
 <envoy_api_field_core.HttpProtocolOptions.max_stream_duration>` does not apply to this corner
 case.

 Note that it is possible to idle timeout even if the wire traffic for a stream is non-idle, due
 to the granularity of events presented to the connection manager. For example, while receiving
 very large request headers, it may be the case that there is traffic regularly arriving on the
 wire while the connection manage is only able to observe the end-of-headers event, hence the
 stream may still idle timeout.

 A value of 0 will completely disable the connection manager stream idle
 timeout, although per-route idle timeout overrides will continue to apply.
      .google.protobuf.Duration stream_idle_timeout = 24;
      Returns:
      The streamIdleTimeout.

    • getStreamIdleTimeoutOrBuilder

      com.google.protobuf.DurationOrBuilder getStreamIdleTimeoutOrBuilder()
       The stream idle timeout for connections managed by the connection manager.
 If not specified, this defaults to 5 minutes. The default value was selected
 so as not to interfere with any smaller configured timeouts that may have
 existed in configurations prior to the introduction of this feature, while
 introducing robustness to TCP connections that terminate without a FIN.

 This idle timeout applies to new streams and is overridable by the
 :ref:`route-level idle_timeout
 <envoy_api_field_route.RouteAction.idle_timeout>`. Even on a stream in
 which the override applies, prior to receipt of the initial request
 headers, the :ref:`stream_idle_timeout
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.stream_idle_timeout>`
 applies. Each time an encode/decode event for headers or data is processed
 for the stream, the timer will be reset. If the timeout fires, the stream
 is terminated with a 408 Request Timeout error code if no upstream response
 header has been received, otherwise a stream reset occurs.

 This timeout also specifies the amount of time that Envoy will wait for the peer to open enough
 window to write any remaining stream data once the entirety of stream data (local end stream is
 true) has been buffered pending available window. In other words, this timeout defends against
 a peer that does not release enough window to completely write the stream, even though all
 data has been proxied within available flow control windows. If the timeout is hit in this
 case, the :ref:`tx_flush_timeout <config_http_conn_man_stats_per_codec>` counter will be
 incremented. Note that :ref:`max_stream_duration
 <envoy_api_field_core.HttpProtocolOptions.max_stream_duration>` does not apply to this corner
 case.

 Note that it is possible to idle timeout even if the wire traffic for a stream is non-idle, due
 to the granularity of events presented to the connection manager. For example, while receiving
 very large request headers, it may be the case that there is traffic regularly arriving on the
 wire while the connection manage is only able to observe the end-of-headers event, hence the
 stream may still idle timeout.

 A value of 0 will completely disable the connection manager stream idle
 timeout, although per-route idle timeout overrides will continue to apply.
      .google.protobuf.Duration stream_idle_timeout = 24;

    • hasRequestTimeout

      boolean hasRequestTimeout()
       The amount of time that Envoy will wait for the entire request to be received.
 The timer is activated when the request is initiated, and is disarmed when the last byte of the
 request is sent upstream (i.e. all decoding filters have processed the request), OR when the
 response is initiated. If not specified or set to 0, this timeout is disabled.
      .google.protobuf.Duration request_timeout = 28;
      Returns:
      Whether the requestTimeout field is set.

    • getRequestTimeout

      com.google.protobuf.Duration getRequestTimeout()
       The amount of time that Envoy will wait for the entire request to be received.
 The timer is activated when the request is initiated, and is disarmed when the last byte of the
 request is sent upstream (i.e. all decoding filters have processed the request), OR when the
 response is initiated. If not specified or set to 0, this timeout is disabled.
      .google.protobuf.Duration request_timeout = 28;
      Returns:
      The requestTimeout.

    • getRequestTimeoutOrBuilder

      com.google.protobuf.DurationOrBuilder getRequestTimeoutOrBuilder()
       The amount of time that Envoy will wait for the entire request to be received.
 The timer is activated when the request is initiated, and is disarmed when the last byte of the
 request is sent upstream (i.e. all decoding filters have processed the request), OR when the
 response is initiated. If not specified or set to 0, this timeout is disabled.
      .google.protobuf.Duration request_timeout = 28;

    • hasDrainTimeout

      boolean hasDrainTimeout()
       The time that Envoy will wait between sending an HTTP/2 “shutdown
 notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
 This is used so that Envoy provides a grace period for new streams that
 race with the final GOAWAY frame. During this grace period, Envoy will
 continue to accept new streams. After the grace period, a final GOAWAY
 frame is sent and Envoy will start refusing new streams. Draining occurs
 both when a connection hits the idle timeout or during general server
 draining. The default grace period is 5000 milliseconds (5 seconds) if this
 option is not specified.
      .google.protobuf.Duration drain_timeout = 12;
      Returns:
      Whether the drainTimeout field is set.

    • getDrainTimeout

      com.google.protobuf.Duration getDrainTimeout()
       The time that Envoy will wait between sending an HTTP/2 “shutdown
 notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
 This is used so that Envoy provides a grace period for new streams that
 race with the final GOAWAY frame. During this grace period, Envoy will
 continue to accept new streams. After the grace period, a final GOAWAY
 frame is sent and Envoy will start refusing new streams. Draining occurs
 both when a connection hits the idle timeout or during general server
 draining. The default grace period is 5000 milliseconds (5 seconds) if this
 option is not specified.
      .google.protobuf.Duration drain_timeout = 12;
      Returns:
      The drainTimeout.

    • getDrainTimeoutOrBuilder

      com.google.protobuf.DurationOrBuilder getDrainTimeoutOrBuilder()
       The time that Envoy will wait between sending an HTTP/2 “shutdown
 notification” (GOAWAY frame with max stream ID) and a final GOAWAY frame.
 This is used so that Envoy provides a grace period for new streams that
 race with the final GOAWAY frame. During this grace period, Envoy will
 continue to accept new streams. After the grace period, a final GOAWAY
 frame is sent and Envoy will start refusing new streams. Draining occurs
 both when a connection hits the idle timeout or during general server
 draining. The default grace period is 5000 milliseconds (5 seconds) if this
 option is not specified.
      .google.protobuf.Duration drain_timeout = 12;

    • hasDelayedCloseTimeout

      boolean hasDelayedCloseTimeout()
       The delayed close timeout is for downstream connections managed by the HTTP connection manager.
 It is defined as a grace period after connection close processing has been locally initiated
 during which Envoy will wait for the peer to close (i.e., a TCP FIN/RST is received by Envoy
 from the downstream connection) prior to Envoy closing the socket associated with that
 connection.
 NOTE: This timeout is enforced even when the socket associated with the downstream connection
 is pending a flush of the write buffer. However, any progress made writing data to the socket
 will restart the timer associated with this timeout. This means that the total grace period for
 a socket in this state will be
 <total_time_waiting_for_write_buffer_flushes>+<delayed_close_timeout>.

 Delaying Envoy's connection close and giving the peer the opportunity to initiate the close
 sequence mitigates a race condition that exists when downstream clients do not drain/process
 data in a connection's receive buffer after a remote close has been detected via a socket
 write(). This race leads to such clients failing to process the response code sent by Envoy,
 which could result in erroneous downstream processing.

 If the timeout triggers, Envoy will close the connection's socket.

 The default timeout is 1000 ms if this option is not specified.

 .. NOTE::
    To be useful in avoiding the race condition described above, this timeout must be set
    to *at least* <max round trip time expected between clients and Envoy>+<100ms to account for
    a reasonable "worst" case processing time for a full iteration of Envoy's event loop>.

 .. WARNING::
    A value of 0 will completely disable delayed close processing. When disabled, the downstream
    connection's socket will be closed immediately after the write flush is completed or will
    never close if the write flush does not complete.
      .google.protobuf.Duration delayed_close_timeout = 26;
      Returns:
      Whether the delayedCloseTimeout field is set.

    • getDelayedCloseTimeout

      com.google.protobuf.Duration getDelayedCloseTimeout()
       The delayed close timeout is for downstream connections managed by the HTTP connection manager.
 It is defined as a grace period after connection close processing has been locally initiated
 during which Envoy will wait for the peer to close (i.e., a TCP FIN/RST is received by Envoy
 from the downstream connection) prior to Envoy closing the socket associated with that
 connection.
 NOTE: This timeout is enforced even when the socket associated with the downstream connection
 is pending a flush of the write buffer. However, any progress made writing data to the socket
 will restart the timer associated with this timeout. This means that the total grace period for
 a socket in this state will be
 <total_time_waiting_for_write_buffer_flushes>+<delayed_close_timeout>.

 Delaying Envoy's connection close and giving the peer the opportunity to initiate the close
 sequence mitigates a race condition that exists when downstream clients do not drain/process
 data in a connection's receive buffer after a remote close has been detected via a socket
 write(). This race leads to such clients failing to process the response code sent by Envoy,
 which could result in erroneous downstream processing.

 If the timeout triggers, Envoy will close the connection's socket.

 The default timeout is 1000 ms if this option is not specified.

 .. NOTE::
    To be useful in avoiding the race condition described above, this timeout must be set
    to *at least* <max round trip time expected between clients and Envoy>+<100ms to account for
    a reasonable "worst" case processing time for a full iteration of Envoy's event loop>.

 .. WARNING::
    A value of 0 will completely disable delayed close processing. When disabled, the downstream
    connection's socket will be closed immediately after the write flush is completed or will
    never close if the write flush does not complete.
      .google.protobuf.Duration delayed_close_timeout = 26;
      Returns:
      The delayedCloseTimeout.

    • getDelayedCloseTimeoutOrBuilder

      com.google.protobuf.DurationOrBuilder getDelayedCloseTimeoutOrBuilder()
       The delayed close timeout is for downstream connections managed by the HTTP connection manager.
 It is defined as a grace period after connection close processing has been locally initiated
 during which Envoy will wait for the peer to close (i.e., a TCP FIN/RST is received by Envoy
 from the downstream connection) prior to Envoy closing the socket associated with that
 connection.
 NOTE: This timeout is enforced even when the socket associated with the downstream connection
 is pending a flush of the write buffer. However, any progress made writing data to the socket
 will restart the timer associated with this timeout. This means that the total grace period for
 a socket in this state will be
 <total_time_waiting_for_write_buffer_flushes>+<delayed_close_timeout>.

 Delaying Envoy's connection close and giving the peer the opportunity to initiate the close
 sequence mitigates a race condition that exists when downstream clients do not drain/process
 data in a connection's receive buffer after a remote close has been detected via a socket
 write(). This race leads to such clients failing to process the response code sent by Envoy,
 which could result in erroneous downstream processing.

 If the timeout triggers, Envoy will close the connection's socket.

 The default timeout is 1000 ms if this option is not specified.

 .. NOTE::
    To be useful in avoiding the race condition described above, this timeout must be set
    to *at least* <max round trip time expected between clients and Envoy>+<100ms to account for
    a reasonable "worst" case processing time for a full iteration of Envoy's event loop>.

 .. WARNING::
    A value of 0 will completely disable delayed close processing. When disabled, the downstream
    connection's socket will be closed immediately after the write flush is completed or will
    never close if the write flush does not complete.
      .google.protobuf.Duration delayed_close_timeout = 26;

    • getAccessLogList

      List<AccessLog> getAccessLogList()
       Configuration for :ref:`HTTP access logs <arch_overview_access_logs>`
 emitted by the connection manager.
      repeated .envoy.config.filter.accesslog.v2.AccessLog access_log = 13;

    • getAccessLog

      AccessLog getAccessLog(int index)
       Configuration for :ref:`HTTP access logs <arch_overview_access_logs>`
 emitted by the connection manager.
      repeated .envoy.config.filter.accesslog.v2.AccessLog access_log = 13;

    • getAccessLogCount

      int getAccessLogCount()
       Configuration for :ref:`HTTP access logs <arch_overview_access_logs>`
 emitted by the connection manager.
      repeated .envoy.config.filter.accesslog.v2.AccessLog access_log = 13;

    • getAccessLogOrBuilderList

      List<? extends AccessLogOrBuilder> getAccessLogOrBuilderList()
       Configuration for :ref:`HTTP access logs <arch_overview_access_logs>`
 emitted by the connection manager.
      repeated .envoy.config.filter.accesslog.v2.AccessLog access_log = 13;

    • getAccessLogOrBuilder

      AccessLogOrBuilder getAccessLogOrBuilder(int index)
       Configuration for :ref:`HTTP access logs <arch_overview_access_logs>`
 emitted by the connection manager.
      repeated .envoy.config.filter.accesslog.v2.AccessLog access_log = 13;

    • hasUseRemoteAddress

      boolean hasUseRemoteAddress()
       If set to true, the connection manager will use the real remote address
 of the client connection when determining internal versus external origin and manipulating
 various headers. If set to false or absent, the connection manager will use the
 :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header. See the documentation for
 :ref:`config_http_conn_man_headers_x-forwarded-for`,
 :ref:`config_http_conn_man_headers_x-envoy-internal`, and
 :ref:`config_http_conn_man_headers_x-envoy-external-address` for more information.
      .google.protobuf.BoolValue use_remote_address = 14;
      Returns:
      Whether the useRemoteAddress field is set.

    • getUseRemoteAddress

      com.google.protobuf.BoolValue getUseRemoteAddress()
       If set to true, the connection manager will use the real remote address
 of the client connection when determining internal versus external origin and manipulating
 various headers. If set to false or absent, the connection manager will use the
 :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header. See the documentation for
 :ref:`config_http_conn_man_headers_x-forwarded-for`,
 :ref:`config_http_conn_man_headers_x-envoy-internal`, and
 :ref:`config_http_conn_man_headers_x-envoy-external-address` for more information.
      .google.protobuf.BoolValue use_remote_address = 14;
      Returns:
      The useRemoteAddress.

    • getUseRemoteAddressOrBuilder

      com.google.protobuf.BoolValueOrBuilder getUseRemoteAddressOrBuilder()
       If set to true, the connection manager will use the real remote address
 of the client connection when determining internal versus external origin and manipulating
 various headers. If set to false or absent, the connection manager will use the
 :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header. See the documentation for
 :ref:`config_http_conn_man_headers_x-forwarded-for`,
 :ref:`config_http_conn_man_headers_x-envoy-internal`, and
 :ref:`config_http_conn_man_headers_x-envoy-external-address` for more information.
      .google.protobuf.BoolValue use_remote_address = 14;

    • getXffNumTrustedHops

      int getXffNumTrustedHops()
       The number of additional ingress proxy hops from the right side of the
 :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header to trust when
 determining the origin client's IP address. The default is zero if this option
 is not specified. See the documentation for
 :ref:`config_http_conn_man_headers_x-forwarded-for` for more information.
      uint32 xff_num_trusted_hops = 19;
      Returns:
      The xffNumTrustedHops.

    • hasInternalAddressConfig

      boolean hasInternalAddressConfig()
       Configures what network addresses are considered internal for stats and header sanitation
 purposes. If unspecified, only RFC1918 IP addresses will be considered internal.
 See the documentation for :ref:`config_http_conn_man_headers_x-envoy-internal` for more
 information about internal/external addresses.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.InternalAddressConfig internal_address_config = 25;
      Returns:
      Whether the internalAddressConfig field is set.

    • getInternalAddressConfig

      HttpConnectionManager.InternalAddressConfig getInternalAddressConfig()
       Configures what network addresses are considered internal for stats and header sanitation
 purposes. If unspecified, only RFC1918 IP addresses will be considered internal.
 See the documentation for :ref:`config_http_conn_man_headers_x-envoy-internal` for more
 information about internal/external addresses.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.InternalAddressConfig internal_address_config = 25;
      Returns:
      The internalAddressConfig.

    • getInternalAddressConfigOrBuilder

      HttpConnectionManager.InternalAddressConfigOrBuilder getInternalAddressConfigOrBuilder()
       Configures what network addresses are considered internal for stats and header sanitation
 purposes. If unspecified, only RFC1918 IP addresses will be considered internal.
 See the documentation for :ref:`config_http_conn_man_headers_x-envoy-internal` for more
 information about internal/external addresses.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.InternalAddressConfig internal_address_config = 25;

    • getSkipXffAppend

      boolean getSkipXffAppend()
       If set, Envoy will not append the remote address to the
 :ref:`config_http_conn_man_headers_x-forwarded-for` HTTP header. This may be used in
 conjunction with HTTP filters that explicitly manipulate XFF after the HTTP connection manager
 has mutated the request headers. While :ref:`use_remote_address
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.use_remote_address>`
 will also suppress XFF addition, it has consequences for logging and other
 Envoy uses of the remote address, so *skip_xff_append* should be used
 when only an elision of XFF addition is intended.
      bool skip_xff_append = 21;
      Returns:
      The skipXffAppend.

    • getVia

      String getVia()
       Via header value to append to request and response headers. If this is
 empty, no via header will be appended.
      string via = 22;
      Returns:
      The via.

    • getViaBytes

      com.google.protobuf.ByteString getViaBytes()
       Via header value to append to request and response headers. If this is
 empty, no via header will be appended.
      string via = 22;
      Returns:
      The bytes for via.

    • hasGenerateRequestId

      boolean hasGenerateRequestId()
       Whether the connection manager will generate the :ref:`x-request-id
 <config_http_conn_man_headers_x-request-id>` header if it does not exist. This defaults to
 true. Generating a random UUID4 is expensive so in high throughput scenarios where this feature
 is not desired it can be disabled.
      .google.protobuf.BoolValue generate_request_id = 15;
      Returns:
      Whether the generateRequestId field is set.

    • getGenerateRequestId

      com.google.protobuf.BoolValue getGenerateRequestId()
       Whether the connection manager will generate the :ref:`x-request-id
 <config_http_conn_man_headers_x-request-id>` header if it does not exist. This defaults to
 true. Generating a random UUID4 is expensive so in high throughput scenarios where this feature
 is not desired it can be disabled.
      .google.protobuf.BoolValue generate_request_id = 15;
      Returns:
      The generateRequestId.

    • getGenerateRequestIdOrBuilder

      com.google.protobuf.BoolValueOrBuilder getGenerateRequestIdOrBuilder()
       Whether the connection manager will generate the :ref:`x-request-id
 <config_http_conn_man_headers_x-request-id>` header if it does not exist. This defaults to
 true. Generating a random UUID4 is expensive so in high throughput scenarios where this feature
 is not desired it can be disabled.
      .google.protobuf.BoolValue generate_request_id = 15;

    • getPreserveExternalRequestId

      boolean getPreserveExternalRequestId()
       Whether the connection manager will keep the :ref:`x-request-id
 <config_http_conn_man_headers_x-request-id>` header if passed for a request that is edge
 (Edge request is the request from external clients to front Envoy) and not reset it, which
 is the current Envoy behaviour. This defaults to false.
      bool preserve_external_request_id = 32;
      Returns:
      The preserveExternalRequestId.

    • getForwardClientCertDetailsValue

      int getForwardClientCertDetailsValue()
       How to handle the :ref:`config_http_conn_man_headers_x-forwarded-client-cert` (XFCC) HTTP
 header.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.ForwardClientCertDetails forward_client_cert_details = 16 [(.validate.rules) = { ... }
      Returns:
      The enum numeric value on the wire for forwardClientCertDetails.

    • getForwardClientCertDetails

      HttpConnectionManager.ForwardClientCertDetails getForwardClientCertDetails()
       How to handle the :ref:`config_http_conn_man_headers_x-forwarded-client-cert` (XFCC) HTTP
 header.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.ForwardClientCertDetails forward_client_cert_details = 16 [(.validate.rules) = { ... }
      Returns:
      The forwardClientCertDetails.

    • hasSetCurrentClientCertDetails

      boolean hasSetCurrentClientCertDetails()
       This field is valid only when :ref:`forward_client_cert_details
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>`
 is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS. It specifies the fields in
 the client certificate to be forwarded. Note that in the
 :ref:`config_http_conn_man_headers_x-forwarded-client-cert` header, *Hash* is always set, and
 *By* is always set when the client certificate presents the URI type Subject Alternative Name
 value.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.SetCurrentClientCertDetails set_current_client_cert_details = 17;
      Returns:
      Whether the setCurrentClientCertDetails field is set.

    • getSetCurrentClientCertDetails

      HttpConnectionManager.SetCurrentClientCertDetails getSetCurrentClientCertDetails()
       This field is valid only when :ref:`forward_client_cert_details
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>`
 is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS. It specifies the fields in
 the client certificate to be forwarded. Note that in the
 :ref:`config_http_conn_man_headers_x-forwarded-client-cert` header, *Hash* is always set, and
 *By* is always set when the client certificate presents the URI type Subject Alternative Name
 value.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.SetCurrentClientCertDetails set_current_client_cert_details = 17;
      Returns:
      The setCurrentClientCertDetails.

    • getSetCurrentClientCertDetailsOrBuilder

      HttpConnectionManager.SetCurrentClientCertDetailsOrBuilder getSetCurrentClientCertDetailsOrBuilder()
       This field is valid only when :ref:`forward_client_cert_details
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.forward_client_cert_details>`
 is APPEND_FORWARD or SANITIZE_SET and the client connection is mTLS. It specifies the fields in
 the client certificate to be forwarded. Note that in the
 :ref:`config_http_conn_man_headers_x-forwarded-client-cert` header, *Hash* is always set, and
 *By* is always set when the client certificate presents the URI type Subject Alternative Name
 value.
      .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.SetCurrentClientCertDetails set_current_client_cert_details = 17;

    • getProxy100Continue

      boolean getProxy100Continue()
       If proxy_100_continue is true, Envoy will proxy incoming "Expect:
 100-continue" headers upstream, and forward "100 Continue" responses
 downstream. If this is false or not set, Envoy will instead strip the
 "Expect: 100-continue" header, and send a "100 Continue" response itself.
      bool proxy_100_continue = 18;
      Returns:
      The proxy100Continue.

    • getRepresentIpv4RemoteAddressAsIpv4MappedIpv6

      boolean getRepresentIpv4RemoteAddressAsIpv4MappedIpv6()
       If
 :ref:`use_remote_address
 <envoy_api_field_config.filter.network.http_connection_manager.v2.HttpConnectionManager.use_remote_address>`
 is true and represent_ipv4_remote_address_as_ipv4_mapped_ipv6 is true and the remote address is
 an IPv4 address, the address will be mapped to IPv6 before it is appended to *x-forwarded-for*.
 This is useful for testing compatibility of upstream services that parse the header value. For
 example, 50.0.0.1 is represented as ::FFFF:50.0.0.1. See `IPv4-Mapped IPv6 Addresses
 <https://tools.ietf.org/html/rfc4291#section-2.5.5.2>`_ for details. This will also affect the
 :ref:`config_http_conn_man_headers_x-envoy-external-address` header. See
 :ref:`http_connection_manager.represent_ipv4_remote_address_as_ipv4_mapped_ipv6
 <config_http_conn_man_runtime_represent_ipv4_remote_address_as_ipv4_mapped_ipv6>` for runtime
 control.
 [#not-implemented-hide:]
      bool represent_ipv4_remote_address_as_ipv4_mapped_ipv6 = 20;
      Returns:
      The representIpv4RemoteAddressAsIpv4MappedIpv6.

    • getUpgradeConfigsList

      List<HttpConnectionManager.UpgradeConfig> getUpgradeConfigsList()
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;

    • getUpgradeConfigs

      HttpConnectionManager.UpgradeConfig getUpgradeConfigs(int index)
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;

    • getUpgradeConfigsCount

      int getUpgradeConfigsCount()
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;

    • getUpgradeConfigsOrBuilderList

      List<? extends HttpConnectionManager.UpgradeConfigOrBuilder> getUpgradeConfigsOrBuilderList()
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;

    • getUpgradeConfigsOrBuilder

      HttpConnectionManager.UpgradeConfigOrBuilder getUpgradeConfigsOrBuilder(int index)
      repeated .envoy.config.filter.network.http_connection_manager.v2.HttpConnectionManager.UpgradeConfig upgrade_configs = 23;

    • hasNormalizePath

      boolean hasNormalizePath()
       Should paths be normalized according to RFC 3986 before any processing of
 requests by HTTP filters or routing? This affects the upstream *:path* header
 as well. For paths that fail this check, Envoy will respond with 400 to
 paths that are malformed. This defaults to false currently but will default
 true in the future. When not specified, this value may be overridden by the
 runtime variable
 :ref:`http_connection_manager.normalize_path<config_http_conn_man_runtime_normalize_path>`.
 See `Normalization and Comparison <https://tools.ietf.org/html/rfc3986#section-6>`_
 for details of normalization.
 Note that Envoy does not perform
 `case normalization <https://tools.ietf.org/html/rfc3986#section-6.2.2.1>`_
      .google.protobuf.BoolValue normalize_path = 30;
      Returns:
      Whether the normalizePath field is set.

    • getNormalizePath

      com.google.protobuf.BoolValue getNormalizePath()
       Should paths be normalized according to RFC 3986 before any processing of
 requests by HTTP filters or routing? This affects the upstream *:path* header
 as well. For paths that fail this check, Envoy will respond with 400 to
 paths that are malformed. This defaults to false currently but will default
 true in the future. When not specified, this value may be overridden by the
 runtime variable
 :ref:`http_connection_manager.normalize_path<config_http_conn_man_runtime_normalize_path>`.
 See `Normalization and Comparison <https://tools.ietf.org/html/rfc3986#section-6>`_
 for details of normalization.
 Note that Envoy does not perform
 `case normalization <https://tools.ietf.org/html/rfc3986#section-6.2.2.1>`_
      .google.protobuf.BoolValue normalize_path = 30;
      Returns:
      The normalizePath.

    • getNormalizePathOrBuilder

      com.google.protobuf.BoolValueOrBuilder getNormalizePathOrBuilder()
       Should paths be normalized according to RFC 3986 before any processing of
 requests by HTTP filters or routing? This affects the upstream *:path* header
 as well. For paths that fail this check, Envoy will respond with 400 to
 paths that are malformed. This defaults to false currently but will default
 true in the future. When not specified, this value may be overridden by the
 runtime variable
 :ref:`http_connection_manager.normalize_path<config_http_conn_man_runtime_normalize_path>`.
 See `Normalization and Comparison <https://tools.ietf.org/html/rfc3986#section-6>`_
 for details of normalization.
 Note that Envoy does not perform
 `case normalization <https://tools.ietf.org/html/rfc3986#section-6.2.2.1>`_
      .google.protobuf.BoolValue normalize_path = 30;

    • getMergeSlashes

      boolean getMergeSlashes()
       Determines if adjacent slashes in the path are merged into one before any processing of
 requests by HTTP filters or routing. This affects the upstream *:path* header as well. Without
 setting this option, incoming requests with path `//dir///file` will not match against route
 with `prefix` match set to `/dir`. Defaults to `false`. Note that slash merging is not part of
 `HTTP spec <https://tools.ietf.org/html/rfc3986>`_ and is provided for convenience.
      bool merge_slashes = 33;
      Returns:
      The mergeSlashes.

    • hasRequestIdExtension

      boolean hasRequestIdExtension()
       The configuration of the request ID extension. This includes operations such as
 generation, validation, and associated tracing operations.

 If not set, Envoy uses the default UUID-based behavior:

 1. Request ID is propagated using *x-request-id* header.

 2. Request ID is a universally unique identifier (UUID).

 3. Tracing decision (sampled, forced, etc) is set in 14th byte of the UUID.
      .envoy.config.filter.network.http_connection_manager.v2.RequestIDExtension request_id_extension = 36;
      Returns:
      Whether the requestIdExtension field is set.

    • getRequestIdExtension

      RequestIDExtension getRequestIdExtension()
       The configuration of the request ID extension. This includes operations such as
 generation, validation, and associated tracing operations.

 If not set, Envoy uses the default UUID-based behavior:

 1. Request ID is propagated using *x-request-id* header.

 2. Request ID is a universally unique identifier (UUID).

 3. Tracing decision (sampled, forced, etc) is set in 14th byte of the UUID.
      .envoy.config.filter.network.http_connection_manager.v2.RequestIDExtension request_id_extension = 36;
      Returns:
      The requestIdExtension.

    • getRequestIdExtensionOrBuilder

      RequestIDExtensionOrBuilder getRequestIdExtensionOrBuilder()
       The configuration of the request ID extension. This includes operations such as
 generation, validation, and associated tracing operations.

 If not set, Envoy uses the default UUID-based behavior:

 1. Request ID is propagated using *x-request-id* header.

 2. Request ID is a universally unique identifier (UUID).

 3. Tracing decision (sampled, forced, etc) is set in 14th byte of the UUID.
      .envoy.config.filter.network.http_connection_manager.v2.RequestIDExtension request_id_extension = 36;

    • getRouteSpecifierCase

      HttpConnectionManager.RouteSpecifierCase getRouteSpecifierCase()