/*
 * WSO2 API Manager - Publisher API
 * This document specifies a **RESTful API** for WSO2 **API Manager** - **Publisher**.  # Authentication The Publisher REST API is protected using OAuth2 and access control is achieved through scopes. Before you start invoking the the API you need to obtain an access token with the required scopes. This guide will walk you through the steps that you will need to follow to obtain an access token. First you need to obtain the consumer key/secret key pair by calling the dynamic client registration (DCR) endpoint. You can add your preferred grant types in the payload. A Sample payload is shown below. ```   {   \"callbackUrl\":\"www.google.lk\",   \"clientName\":\"rest_api_publisher\",   \"owner\":\"admin\",   \"grantType\":\"client_credentials password refresh_token\",   \"saasApp\":true   } ``` Create a file (payload.json) with the above sample payload, and use the cURL shown bellow to invoke the DCR endpoint. Authorization header of this should contain the base64 encoded admin username and password. **Format of the request** ```   curl -X POST -H \"Authorization: Basic Base64(admin_username:admin_password)\" -H \"Content-Type: application/json\"   \\ -d @payload.json https://<host>:<servlet_port>/client-registration/v0.17/register ``` **Sample request** ```   curl -X POST -H \"Authorization: Basic YWRtaW46YWRtaW4=\" -H \"Content-Type: application/json\"   \\ -d @payload.json https://localhost:9443/client-registration/v0.17/register ``` Following is a sample response after invoking the above curl. ``` { \"clientId\": \"fOCi4vNJ59PpHucC2CAYfYuADdMa\", \"clientName\": \"rest_api_publisher\", \"callBackURL\": \"www.google.lk\", \"clientSecret\": \"a4FwHlq0iCIKVs2MPIIDnepZnYMa\", \"isSaasApplication\": true, \"appOwner\": \"admin\", \"jsonString\": \"{\\\"grant_types\\\":\\\"client_credentials password refresh_token\\\",\\\"redirect_uris\\\":\\\"www.google.lk\\\",\\\"client_name\\\":\\\"rest_api123\\\"}\", \"jsonAppAttribute\": \"{}\", \"tokenType\": null } ``` Next you must use the above client id and secret to obtain the access token. We will be using the password grant type for this, you can use any grant type you desire. You also need to add the proper **scope** when getting the access token. All possible scopes for publisher REST API can be viewed in **OAuth2 Security** section of this document and scope for each resource is given in **authorization** section of resource documentation. Following is the format of the request if you are using the password grant type. ``` curl -k -d \"grant_type=password&username=<admin_username>&password=<admin_passowrd&scope=<scopes seperated by space>\" \\ -H \"Authorization: Basic base64(cliet_id:client_secret)\" \\ https://<host>:<servlet_port>/oauth2/token ``` **Sample request** ``` curl https://localhost:9443/oauth2/token -k \\ -H \"Authorization: Basic Zk9DaTR2Tko1OVBwSHVjQzJDQVlmWXVBRGRNYTphNEZ3SGxxMGlDSUtWczJNUElJRG5lcFpuWU1h\" \\ -d \"grant_type=password&username=admin&password=admin&scope=apim:api_view apim:api_create\" ``` Shown below is a sample response to the above request. ``` { \"access_token\": \"e79bda48-3406-3178-acce-f6e4dbdcbb12\", \"refresh_token\": \"a757795d-e69f-38b8-bd85-9aded677a97c\", \"scope\": \"apim:api_create apim:api_view\", \"token_type\": \"Bearer\", \"expires_in\": 3600 } ``` Now you have a valid access token, which you can use to invoke an API. Navigate through the API descriptions to find the required API, obtain an access token as described above and invoke the API with the authentication header. If you use a different authentication mechanism, this process may change.  # Try out in Postman If you want to try-out the embedded postman collection with \"Run in Postman\" option, please follow the guidelines listed below. * All of the OAuth2 secured endpoints have been configured with an Authorization Bearer header with a parameterized access token. Before invoking any REST API resource make sure you run the `Register DCR Application` and `Generate Access Token` requests to fetch an access token with all required scopes. * Make sure you have an API Manager instance up and running. * Update the `basepath` parameter to match the hostname and port of the APIM instance.  [![Run in Postman](https://run.pstmn.io/button.svg)](https://app.getpostman.com/run-collection/a09044034b5c3c1b01a9) 
 *
 * The version of the OpenAPI document: v3
 * Contact: architecture@wso2.com
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
 * https://openapi-generator.tech
 * Do not edit the class manually.
 */


package org.wso2.am.integration.clients.publisher.api.v1;

import org.wso2.am.integration.clients.publisher.api.ApiCallback;
import org.wso2.am.integration.clients.publisher.api.ApiClient;
import org.wso2.am.integration.clients.publisher.api.ApiException;
import org.wso2.am.integration.clients.publisher.api.ApiResponse;
import org.wso2.am.integration.clients.publisher.api.Configuration;
import org.wso2.am.integration.clients.publisher.api.Pair;
import org.wso2.am.integration.clients.publisher.api.ProgressRequestBody;
import org.wso2.am.integration.clients.publisher.api.ProgressResponseBody;

import com.google.gson.reflect.TypeToken;

import java.io.IOException;


import org.wso2.am.integration.clients.publisher.api.v1.dto.ApiEndpointValidationResponseDTO;
import org.wso2.am.integration.clients.publisher.api.v1.dto.AsyncAPISpecificationValidationResponseDTO;
import org.wso2.am.integration.clients.publisher.api.v1.dto.ErrorDTO;
import java.io.File;
import org.wso2.am.integration.clients.publisher.api.v1.dto.GraphQLValidationResponseDTO;
import org.wso2.am.integration.clients.publisher.api.v1.dto.OpenAPIDefinitionValidationResponseDTO;
import org.wso2.am.integration.clients.publisher.api.v1.dto.WSDLValidationResponseDTO;

import java.lang.reflect.Type;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;

public class ValidationApi {
    private ApiClient localVarApiClient;

    public ValidationApi() {
        this(Configuration.getDefaultApiClient());
    }

    public ValidationApi(ApiClient apiClient) {
        this.localVarApiClient = apiClient;
    }

    public ApiClient getApiClient() {
        return localVarApiClient;
    }

    public void setApiClient(ApiClient apiClient) {
        this.localVarApiClient = apiClient;
    }

    /**
     * Build call for validateAPI
     * @param query **Search condition**.  You can search in attributes by using an **\&quot;&lt;attribute&gt;:\&quot;** modifier.  Eg. \&quot;name:wso2\&quot; will match an API if the provider of the API is exactly \&quot;wso2\&quot;.  Supported attribute modifiers are [** version, context, name **]  If no advanced attribute modifier has been specified, search will match the given query string against API Name.  (required)
     * @param ifNoneMatch Validator for conditional requests; based on the ETag of the formerly retrieved variant of the resource.  (optional)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateAPICall(String query, String ifNoneMatch, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        if (query != null) {
            localVarQueryParams.addAll(localVarApiClient.parameterToPair("query", query));
        }

        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        if (ifNoneMatch != null) {
            localVarHeaderParams.put("If-None-Match", localVarApiClient.parameterToString(ifNoneMatch));
        }

        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateAPIValidateBeforeCall(String query, String ifNoneMatch, final ApiCallback _callback) throws ApiException {
        
        // verify the required parameter 'query' is set
        if (query == null) {
            throw new ApiException("Missing the required parameter 'query' when calling validateAPI(Async)");
        }
        

        okhttp3.Call localVarCall = validateAPICall(query, ifNoneMatch, _callback);
        return localVarCall;

    }

    /**
     * Check Given API Context Name already Exists
     * Using this operation, you can check a given API context is already used. You need to provide the context name you want to check. 
     * @param query **Search condition**.  You can search in attributes by using an **\&quot;&lt;attribute&gt;:\&quot;** modifier.  Eg. \&quot;name:wso2\&quot; will match an API if the provider of the API is exactly \&quot;wso2\&quot;.  Supported attribute modifiers are [** version, context, name **]  If no advanced attribute modifier has been specified, search will match the given query string against API Name.  (required)
     * @param ifNoneMatch Validator for conditional requests; based on the ETag of the formerly retrieved variant of the resource.  (optional)
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public void validateAPI(String query, String ifNoneMatch) throws ApiException {
        validateAPIWithHttpInfo(query, ifNoneMatch);
    }

    /**
     * Check Given API Context Name already Exists
     * Using this operation, you can check a given API context is already used. You need to provide the context name you want to check. 
     * @param query **Search condition**.  You can search in attributes by using an **\&quot;&lt;attribute&gt;:\&quot;** modifier.  Eg. \&quot;name:wso2\&quot; will match an API if the provider of the API is exactly \&quot;wso2\&quot;.  Supported attribute modifiers are [** version, context, name **]  If no advanced attribute modifier has been specified, search will match the given query string against API Name.  (required)
     * @param ifNoneMatch Validator for conditional requests; based on the ETag of the formerly retrieved variant of the resource.  (optional)
     * @return ApiResponse&lt;Void&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<Void> validateAPIWithHttpInfo(String query, String ifNoneMatch) throws ApiException {
        okhttp3.Call localVarCall = validateAPIValidateBeforeCall(query, ifNoneMatch, null);
        return localVarApiClient.execute(localVarCall);
    }

    /**
     * Check Given API Context Name already Exists (asynchronously)
     * Using this operation, you can check a given API context is already used. You need to provide the context name you want to check. 
     * @param query **Search condition**.  You can search in attributes by using an **\&quot;&lt;attribute&gt;:\&quot;** modifier.  Eg. \&quot;name:wso2\&quot; will match an API if the provider of the API is exactly \&quot;wso2\&quot;.  Supported attribute modifiers are [** version, context, name **]  If no advanced attribute modifier has been specified, search will match the given query string against API Name.  (required)
     * @param ifNoneMatch Validator for conditional requests; based on the ETag of the formerly retrieved variant of the resource.  (optional)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateAPIAsync(String query, String ifNoneMatch, final ApiCallback<Void> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateAPIValidateBeforeCall(query, ifNoneMatch, _callback);
        localVarApiClient.executeAsync(localVarCall, _callback);
        return localVarCall;
    }
    /**
     * Build call for validateAsyncAPISpecification
     * @param returnContent Specify whether to return the full content of the AsyncAPI specification in the response. This is only applicable when using url based validation (optional, default to false)
     * @param url AsyncAPI definition url (optional)
     * @param file AsyncAPI definition as a file (optional)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned </td><td>  * Content-Type - The content type of the body. <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateAsyncAPISpecificationCall(Boolean returnContent, String url, File file, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate-asyncapi";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        if (returnContent != null) {
            localVarQueryParams.addAll(localVarApiClient.parameterToPair("returnContent", returnContent));
        }

        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        if (url != null) {
            localVarFormParams.put("url", url);
        }

        if (file != null) {
            localVarFormParams.put("file", file);
        }

        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            "multipart/form-data"
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateAsyncAPISpecificationValidateBeforeCall(Boolean returnContent, String url, File file, final ApiCallback _callback) throws ApiException {
        

        okhttp3.Call localVarCall = validateAsyncAPISpecificationCall(returnContent, url, file, _callback);
        return localVarCall;

    }

    /**
     * Validate an AsyncAPI Specification
     * This operation can be used to validate and AsyncAPI Specification and retrieve a summary. Provide either &#39;url&#39; or &#39;file&#39; to specify the definition.
     * @param returnContent Specify whether to return the full content of the AsyncAPI specification in the response. This is only applicable when using url based validation (optional, default to false)
     * @param url AsyncAPI definition url (optional)
     * @param file AsyncAPI definition as a file (optional)
     * @return AsyncAPISpecificationValidationResponseDTO
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned </td><td>  * Content-Type - The content type of the body. <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public AsyncAPISpecificationValidationResponseDTO validateAsyncAPISpecification(Boolean returnContent, String url, File file) throws ApiException {
        ApiResponse<AsyncAPISpecificationValidationResponseDTO> localVarResp = validateAsyncAPISpecificationWithHttpInfo(returnContent, url, file);
        return localVarResp.getData();
    }

    /**
     * Validate an AsyncAPI Specification
     * This operation can be used to validate and AsyncAPI Specification and retrieve a summary. Provide either &#39;url&#39; or &#39;file&#39; to specify the definition.
     * @param returnContent Specify whether to return the full content of the AsyncAPI specification in the response. This is only applicable when using url based validation (optional, default to false)
     * @param url AsyncAPI definition url (optional)
     * @param file AsyncAPI definition as a file (optional)
     * @return ApiResponse&lt;AsyncAPISpecificationValidationResponseDTO&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned </td><td>  * Content-Type - The content type of the body. <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<AsyncAPISpecificationValidationResponseDTO> validateAsyncAPISpecificationWithHttpInfo(Boolean returnContent, String url, File file) throws ApiException {
        okhttp3.Call localVarCall = validateAsyncAPISpecificationValidateBeforeCall(returnContent, url, file, null);
        Type localVarReturnType = new TypeToken<AsyncAPISpecificationValidationResponseDTO>(){}.getType();
        return localVarApiClient.execute(localVarCall, localVarReturnType);
    }

    /**
     * Validate an AsyncAPI Specification (asynchronously)
     * This operation can be used to validate and AsyncAPI Specification and retrieve a summary. Provide either &#39;url&#39; or &#39;file&#39; to specify the definition.
     * @param returnContent Specify whether to return the full content of the AsyncAPI specification in the response. This is only applicable when using url based validation (optional, default to false)
     * @param url AsyncAPI definition url (optional)
     * @param file AsyncAPI definition as a file (optional)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned </td><td>  * Content-Type - The content type of the body. <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateAsyncAPISpecificationAsync(Boolean returnContent, String url, File file, final ApiCallback<AsyncAPISpecificationValidationResponseDTO> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateAsyncAPISpecificationValidateBeforeCall(returnContent, url, file, _callback);
        Type localVarReturnType = new TypeToken<AsyncAPISpecificationValidationResponseDTO>(){}.getType();
        localVarApiClient.executeAsync(localVarCall, localVarReturnType, _callback);
        return localVarCall;
    }
    /**
     * Build call for validateEndpoint
     * @param endpointUrl API endpoint url (required)
     * @param apiId  (optional)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateEndpointCall(String endpointUrl, String apiId, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate-endpoint";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        if (endpointUrl != null) {
            localVarQueryParams.addAll(localVarApiClient.parameterToPair("endpointUrl", endpointUrl));
        }

        if (apiId != null) {
            localVarQueryParams.addAll(localVarApiClient.parameterToPair("apiId", apiId));
        }

        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateEndpointValidateBeforeCall(String endpointUrl, String apiId, final ApiCallback _callback) throws ApiException {
        
        // verify the required parameter 'endpointUrl' is set
        if (endpointUrl == null) {
            throw new ApiException("Missing the required parameter 'endpointUrl' when calling validateEndpoint(Async)");
        }
        

        okhttp3.Call localVarCall = validateEndpointCall(endpointUrl, apiId, _callback);
        return localVarCall;

    }

    /**
     * Check Whether Given Endpoint URL is Valid
     * Using this operation, it is possible check whether the given API endpoint url is a valid url 
     * @param endpointUrl API endpoint url (required)
     * @param apiId  (optional)
     * @return ApiEndpointValidationResponseDTO
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiEndpointValidationResponseDTO validateEndpoint(String endpointUrl, String apiId) throws ApiException {
        ApiResponse<ApiEndpointValidationResponseDTO> localVarResp = validateEndpointWithHttpInfo(endpointUrl, apiId);
        return localVarResp.getData();
    }

    /**
     * Check Whether Given Endpoint URL is Valid
     * Using this operation, it is possible check whether the given API endpoint url is a valid url 
     * @param endpointUrl API endpoint url (required)
     * @param apiId  (optional)
     * @return ApiResponse&lt;ApiEndpointValidationResponseDTO&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<ApiEndpointValidationResponseDTO> validateEndpointWithHttpInfo(String endpointUrl, String apiId) throws ApiException {
        okhttp3.Call localVarCall = validateEndpointValidateBeforeCall(endpointUrl, apiId, null);
        Type localVarReturnType = new TypeToken<ApiEndpointValidationResponseDTO>(){}.getType();
        return localVarApiClient.execute(localVarCall, localVarReturnType);
    }

    /**
     * Check Whether Given Endpoint URL is Valid (asynchronously)
     * Using this operation, it is possible check whether the given API endpoint url is a valid url 
     * @param endpointUrl API endpoint url (required)
     * @param apiId  (optional)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateEndpointAsync(String endpointUrl, String apiId, final ApiCallback<ApiEndpointValidationResponseDTO> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateEndpointValidateBeforeCall(endpointUrl, apiId, _callback);
        Type localVarReturnType = new TypeToken<ApiEndpointValidationResponseDTO>(){}.getType();
        localVarApiClient.executeAsync(localVarCall, localVarReturnType, _callback);
        return localVarCall;
    }
    /**
     * Build call for validateGraphQLSchema
     * @param file Definition to upload as a file (required)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateGraphQLSchemaCall(File file, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate-graphql-schema";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        if (file != null) {
            localVarFormParams.put("file", file);
        }

        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            "multipart/form-data"
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateGraphQLSchemaValidateBeforeCall(File file, final ApiCallback _callback) throws ApiException {
        
        // verify the required parameter 'file' is set
        if (file == null) {
            throw new ApiException("Missing the required parameter 'file' when calling validateGraphQLSchema(Async)");
        }
        

        okhttp3.Call localVarCall = validateGraphQLSchemaCall(file, _callback);
        return localVarCall;

    }

    /**
     * Validate a GraphQL SDL
     * This operation can be used to validate a graphQL definition and retrieve a summary. 
     * @param file Definition to upload as a file (required)
     * @return GraphQLValidationResponseDTO
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public GraphQLValidationResponseDTO validateGraphQLSchema(File file) throws ApiException {
        ApiResponse<GraphQLValidationResponseDTO> localVarResp = validateGraphQLSchemaWithHttpInfo(file);
        return localVarResp.getData();
    }

    /**
     * Validate a GraphQL SDL
     * This operation can be used to validate a graphQL definition and retrieve a summary. 
     * @param file Definition to upload as a file (required)
     * @return ApiResponse&lt;GraphQLValidationResponseDTO&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<GraphQLValidationResponseDTO> validateGraphQLSchemaWithHttpInfo(File file) throws ApiException {
        okhttp3.Call localVarCall = validateGraphQLSchemaValidateBeforeCall(file, null);
        Type localVarReturnType = new TypeToken<GraphQLValidationResponseDTO>(){}.getType();
        return localVarApiClient.execute(localVarCall, localVarReturnType);
    }

    /**
     * Validate a GraphQL SDL (asynchronously)
     * This operation can be used to validate a graphQL definition and retrieve a summary. 
     * @param file Definition to upload as a file (required)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateGraphQLSchemaAsync(File file, final ApiCallback<GraphQLValidationResponseDTO> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateGraphQLSchemaValidateBeforeCall(file, _callback);
        Type localVarReturnType = new TypeToken<GraphQLValidationResponseDTO>(){}.getType();
        localVarApiClient.executeAsync(localVarCall, localVarReturnType, _callback);
        return localVarCall;
    }
    /**
     * Build call for validateOpenAPIDefinition
     * @param returnContent Specify whether to return the full content of the OpenAPI definition in the response. This is only applicable when using url based validation  (optional, default to false)
     * @param url OpenAPI definition url (optional)
     * @param file OpenAPI definition as a file (optional)
     * @param inlineAPIDefinition Inline content of the OpenAPI definition (optional)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateOpenAPIDefinitionCall(Boolean returnContent, String url, File file, String inlineAPIDefinition, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate-openapi";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        if (returnContent != null) {
            localVarQueryParams.addAll(localVarApiClient.parameterToPair("returnContent", returnContent));
        }

        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        if (url != null) {
            localVarFormParams.put("url", url);
        }

        if (file != null) {
            localVarFormParams.put("file", file);
        }

        if (inlineAPIDefinition != null) {
            localVarFormParams.put("inlineAPIDefinition", inlineAPIDefinition);
        }

        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            "multipart/form-data"
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateOpenAPIDefinitionValidateBeforeCall(Boolean returnContent, String url, File file, String inlineAPIDefinition, final ApiCallback _callback) throws ApiException {
        

        okhttp3.Call localVarCall = validateOpenAPIDefinitionCall(returnContent, url, file, inlineAPIDefinition, _callback);
        return localVarCall;

    }

    /**
     * Validate an OpenAPI Definition
     * This operation can be used to validate an OpenAPI definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param returnContent Specify whether to return the full content of the OpenAPI definition in the response. This is only applicable when using url based validation  (optional, default to false)
     * @param url OpenAPI definition url (optional)
     * @param file OpenAPI definition as a file (optional)
     * @param inlineAPIDefinition Inline content of the OpenAPI definition (optional)
     * @return OpenAPIDefinitionValidationResponseDTO
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public OpenAPIDefinitionValidationResponseDTO validateOpenAPIDefinition(Boolean returnContent, String url, File file, String inlineAPIDefinition) throws ApiException {
        ApiResponse<OpenAPIDefinitionValidationResponseDTO> localVarResp = validateOpenAPIDefinitionWithHttpInfo(returnContent, url, file, inlineAPIDefinition);
        return localVarResp.getData();
    }

    /**
     * Validate an OpenAPI Definition
     * This operation can be used to validate an OpenAPI definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param returnContent Specify whether to return the full content of the OpenAPI definition in the response. This is only applicable when using url based validation  (optional, default to false)
     * @param url OpenAPI definition url (optional)
     * @param file OpenAPI definition as a file (optional)
     * @param inlineAPIDefinition Inline content of the OpenAPI definition (optional)
     * @return ApiResponse&lt;OpenAPIDefinitionValidationResponseDTO&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<OpenAPIDefinitionValidationResponseDTO> validateOpenAPIDefinitionWithHttpInfo(Boolean returnContent, String url, File file, String inlineAPIDefinition) throws ApiException {
        okhttp3.Call localVarCall = validateOpenAPIDefinitionValidateBeforeCall(returnContent, url, file, inlineAPIDefinition, null);
        Type localVarReturnType = new TypeToken<OpenAPIDefinitionValidationResponseDTO>(){}.getType();
        return localVarApiClient.execute(localVarCall, localVarReturnType);
    }

    /**
     * Validate an OpenAPI Definition (asynchronously)
     * This operation can be used to validate an OpenAPI definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param returnContent Specify whether to return the full content of the OpenAPI definition in the response. This is only applicable when using url based validation  (optional, default to false)
     * @param url OpenAPI definition url (optional)
     * @param file OpenAPI definition as a file (optional)
     * @param inlineAPIDefinition Inline content of the OpenAPI definition (optional)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateOpenAPIDefinitionAsync(Boolean returnContent, String url, File file, String inlineAPIDefinition, final ApiCallback<OpenAPIDefinitionValidationResponseDTO> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateOpenAPIDefinitionValidateBeforeCall(returnContent, url, file, inlineAPIDefinition, _callback);
        Type localVarReturnType = new TypeToken<OpenAPIDefinitionValidationResponseDTO>(){}.getType();
        localVarApiClient.executeAsync(localVarCall, localVarReturnType, _callback);
        return localVarCall;
    }
    /**
     * Build call for validateWSDLDefinition
     * @param url Definition url (optional)
     * @param file Definition to upload as a file (optional)
     * @param _callback Callback for upload/download progress
     * @return Call to execute
     * @throws ApiException If fail to serialize the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateWSDLDefinitionCall(String url, File file, final ApiCallback _callback) throws ApiException {
        Object localVarPostBody = null;

        // create path and map variables
        String localVarPath = "/apis/validate-wsdl";

        List<Pair> localVarQueryParams = new ArrayList<Pair>();
        List<Pair> localVarCollectionQueryParams = new ArrayList<Pair>();
        Map<String, String> localVarHeaderParams = new HashMap<String, String>();
        Map<String, String> localVarCookieParams = new HashMap<String, String>();
        Map<String, Object> localVarFormParams = new HashMap<String, Object>();
        if (url != null) {
            localVarFormParams.put("url", url);
        }

        if (file != null) {
            localVarFormParams.put("file", file);
        }

        final String[] localVarAccepts = {
            "application/json"
        };
        final String localVarAccept = localVarApiClient.selectHeaderAccept(localVarAccepts);
        if (localVarAccept != null) {
            localVarHeaderParams.put("Accept", localVarAccept);
        }

        final String[] localVarContentTypes = {
            "multipart/form-data"
        };
        final String localVarContentType = localVarApiClient.selectHeaderContentType(localVarContentTypes);
        localVarHeaderParams.put("Content-Type", localVarContentType);

        String[] localVarAuthNames = new String[] { "OAuth2Security" };
        return localVarApiClient.buildCall(localVarPath, "POST", localVarQueryParams, localVarCollectionQueryParams, localVarPostBody, localVarHeaderParams, localVarCookieParams, localVarFormParams, localVarAuthNames, _callback);
    }

    @SuppressWarnings("rawtypes")
    private okhttp3.Call validateWSDLDefinitionValidateBeforeCall(String url, File file, final ApiCallback _callback) throws ApiException {
        

        okhttp3.Call localVarCall = validateWSDLDefinitionCall(url, file, _callback);
        return localVarCall;

    }

    /**
     * Validate a WSDL Definition
     * This operation can be used to validate a WSDL definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param url Definition url (optional)
     * @param file Definition to upload as a file (optional)
     * @return WSDLValidationResponseDTO
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public WSDLValidationResponseDTO validateWSDLDefinition(String url, File file) throws ApiException {
        ApiResponse<WSDLValidationResponseDTO> localVarResp = validateWSDLDefinitionWithHttpInfo(url, file);
        return localVarResp.getData();
    }

    /**
     * Validate a WSDL Definition
     * This operation can be used to validate a WSDL definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param url Definition url (optional)
     * @param file Definition to upload as a file (optional)
     * @return ApiResponse&lt;WSDLValidationResponseDTO&gt;
     * @throws ApiException If fail to call the API, e.g. server error or cannot deserialize the response body
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public ApiResponse<WSDLValidationResponseDTO> validateWSDLDefinitionWithHttpInfo(String url, File file) throws ApiException {
        okhttp3.Call localVarCall = validateWSDLDefinitionValidateBeforeCall(url, file, null);
        Type localVarReturnType = new TypeToken<WSDLValidationResponseDTO>(){}.getType();
        return localVarApiClient.execute(localVarCall, localVarReturnType);
    }

    /**
     * Validate a WSDL Definition (asynchronously)
     * This operation can be used to validate a WSDL definition and retrieve a summary. Provide either &#x60;url&#x60; or &#x60;file&#x60; to specify the definition. 
     * @param url Definition url (optional)
     * @param file Definition to upload as a file (optional)
     * @param _callback The callback to be executed when the API call finishes
     * @return The request call
     * @throws ApiException If fail to process the API call, e.g. serializing the request body object
     * @http.response.details
     <table summary="Response Details" border="1">
        <tr><td> Status Code </td><td> Description </td><td> Response Headers </td></tr>
        <tr><td> 200 </td><td> OK. API definition validation information is returned  </td><td>  * Content-Type - The content type of the body.  <br>  </td></tr>
        <tr><td> 400 </td><td> Bad Request. Invalid request or validation error. </td><td>  -  </td></tr>
        <tr><td> 404 </td><td> Not Found. The specified resource does not exist. </td><td>  -  </td></tr>
     </table>
     */
    public okhttp3.Call validateWSDLDefinitionAsync(String url, File file, final ApiCallback<WSDLValidationResponseDTO> _callback) throws ApiException {

        okhttp3.Call localVarCall = validateWSDLDefinitionValidateBeforeCall(url, file, _callback);
        Type localVarReturnType = new TypeToken<WSDLValidationResponseDTO>(){}.getType();
        localVarApiClient.executeAsync(localVarCall, localVarReturnType, _callback);
        return localVarCall;
    }
}
