net.dataforte.cassandra.pool
Class PoolProperties

java.lang.Object
  net.dataforte.cassandra.pool.PoolProperties

All Implemented Interfaces:

PoolConfiguration

public class PoolProperties
extends Object
implements PoolConfiguration

Author:

Tristan Tarrant

Nested Class Summary

static class

PoolProperties.InterceptorProperty

Field Summary

protected int	abandonWhenPercentageFull
protected boolean	accessToUnderlyingConnectionAllowed
protected boolean	automaticHostDiscovery
protected String[]	configuredHosts
protected HostFailoverPolicy	failoverPolicy
protected boolean	fairQueue
protected boolean	framed
protected String	host
protected long	hostRetryInterval
protected int	initialSize
protected boolean	jmxEnabled
protected String	keySpace
protected boolean	logAbandoned
protected int	maxActive
protected long	maxAge
protected int	maxIdle
protected int	maxWait
protected int	minEvictableIdleTimeMillis
protected int	minIdle
protected String	name
protected int	numTestsPerEvictionRun
protected String	password
protected static AtomicInteger	poolCounter
protected int	port
protected boolean	removeAbandoned
protected int	removeAbandonedTimeout
protected int	socketTimeout
protected int	suspectTimeout
protected boolean	testOnBorrow
protected boolean	testOnConnect
protected boolean	testOnReturn
protected boolean	testWhileIdle
protected int	timeBetweenEvictionRunsMillis
protected String	url
protected boolean	useEquals
protected boolean	useLock
protected String	username
protected long	validationInterval

Constructor Summary

PoolProperties()

Method Summary

Object	get(String name) Provides a generic getter for any of the declared properties of the PoolConfiguration
int	getAbandonWhenPercentageFull() Connections that have been abandoned (timed out) wont get closed and reported up unless the number of connections in use are above the percentage defined by abandonWhenPercentageFull.
String[]	getConfiguredHosts() Returns an array of configured hosts (may be different from the actual list if dynamic discovery is enabled)
Object	getDataSource() Returns a datasource, if one exists that is being used to create connections.
String	getDataSourceJNDI() Returns the JNDI string configured for data source usage.
HostFailoverPolicy	getFailoverPolicy() Returns the failover policy.
String	getHost() Returns the Cassandra hosts
long	getHostRetryInterval() Returns the interval in milliseconds before retrying a host to which a connection has failed in the past.
int	getInitialSize() Returns the number of connections that will be established when the connection pool is started.
String	getKeySpace() Returns the keyspace
int	getMaxActive() The maximum number of active connections that can be allocated from this pool at the same time.
long	getMaxAge() Time in milliseconds to keep this connection alive even when used.
int	getMaxIdle() The maximum number of connections that should be kept in the idle pool if PoolConfiguration.isPoolSweeperEnabled() returns false.
int	getMaxWait() The maximum number of milliseconds that the pool will wait (when there are no available connections and the PoolConfiguration.getMaxActive() has been reached) for a connection to be returned before throwing an exception.
int	getMinEvictableIdleTimeMillis() The minimum amount of time an object must sit idle in the pool before it is eligible for eviction.
int	getMinIdle() The minimum number of established connections that should be kept in the pool at all times.
String	getName() Returns the name of the connection pool.
int	getNumTestsPerEvictionRun() Property not used
String	getPassword() Returns the password used when establishing connections to the database.
static int	getPoolCounter()
String	getPoolName()
int	getPort() Returns the Cassandra port (defaults to 9160)
static Map<String,String>	getProperties(String propText, Map<String,String> props)
static Collection<String>	getPropertyNames()
int	getRemoveAbandonedTimeout() The time in seconds before a connection can be considered abandoned.
int	getSocketTimeout() Returns the socket timeout in milliseconds
int	getSuspectTimeout() Returns the time in seconds to pass before a connection is marked an abanoned suspect.
int	getTimeBetweenEvictionRunsMillis() The number of milliseconds to sleep between runs of the idle connection validation, abandoned cleaner and idle pool resizing.
String	getUrl() Returns the Cassandra connection URL
boolean	getUseLock() Return true if a lock should be used when operations are performed on the connection object.
String	getUsername() Returns the username used to establish the connection with
long	getValidationInterval() avoid excess validation, only run validation at most at this frequency - time in milliseconds.
boolean	isAutomaticHostDiscovery() Returns whether automatic host discovery is being used
boolean	isFairQueue() Returns true if a fair queue is being used by the connection pool
boolean	isFramed() Returns whether framed connection mode is being used
boolean	isJmxEnabled() If set to true, the connection pool creates a ConnectionPoolMBean object that can be registered with JMX to receive notifications and state about the pool.
boolean	isLogAbandoned() boolean flag to set if stack traces should be logged for application code which abandoned a Connection.
boolean	isPoolSweeperEnabled() Returns true if the pool sweeper is enabled for the connection pool.
boolean	isRemoveAbandoned() boolean flag to remove abandoned connections if they exceed the removeAbandonedTimout.
boolean	isTestOnBorrow() The indication of whether objects will be validated before being borrowed from the pool.
boolean	isTestOnConnect() Returns true if we should run the validation query when connecting to the database for the first time on a connection.
boolean	isTestOnReturn() The indication of whether objects will be validated after being returned to the pool.
boolean	isTestWhileIdle() Set to true if query validation should take place while the connection is idle.
boolean	isUseEquals() Set to true if you wish the ProxyConnection class to use String.equals instead of == when comparing method names.
void	set(String name, Object value) Provides a generic setter for any of the declared properties of the PoolConfiguration
void	setAbandonWhenPercentageFull(int percentage) Connections that have been abandoned (timed out) wont get closed and reported up unless the number of connections in use are above the percentage defined by abandonWhenPercentageFull.
void	setAutomaticHostDiscovery(boolean automaticHostDiscovery) Sets whether Cassandra hosts should be queried to automatically obtain a list of other hosts
void	setDataSource(Object ds) Injects a datasource that will be used to retrieve/create connections.
void	setDataSourceJNDI(String jndiDS) Configure the connection pool to use a DataSource according to PoolConfiguration.setDataSource(Object) But instead of injecting the object, specify the JNDI location.
void	setFailoverPolicy(HostFailoverPolicy failoverPolicy) Sets the host failover policy, i.e. what to do when connecting to a host fails
void	setFairQueue(boolean fairQueue) Set to true if you wish that calls to getConnection should be treated fairly in a true FIFO fashion.
void	setFramed(boolean framed) Sets whether to use framed connection mode (default false)
void	setHost(String host) Sets the Cassandra host.
void	setHostRetryInterval(long hostRetryInterval) Sets the interval in milliseconds before retrying a host to which a connection has failed in the past.
void	setInitialSize(int initialSize) Set the number of connections that will be established when the connection pool is started.
void	setJmxEnabled(boolean jmxEnabled) If set to true, the connection pool creates a ConnectionPoolMBean object that can be registered with JMX to receive notifications and state about the pool.
void	setKeySpace(String keySpace) Sets the keyspace
void	setLogAbandoned(boolean logAbandoned) boolean flag to set if stack traces should be logged for application code which abandoned a Connection.
void	setMaxActive(int maxActive) The maximum number of active connections that can be allocated from this pool at the same time.
void	setMaxAge(long maxAge) Time in milliseconds to keep this connection alive even when used.
void	setMaxIdle(int maxIdle) The maximum number of connections that should be kept in the idle pool if PoolConfiguration.isPoolSweeperEnabled() returns false.
void	setMaxWait(int maxWait) The maximum number of milliseconds that the pool will wait (when there are no available connections and the PoolConfiguration.getMaxActive() has been reached) for a connection to be returned before throwing an exception.
void	setMinEvictableIdleTimeMillis(int minEvictableIdleTimeMillis) The minimum amount of time an object must sit idle in the pool before it is eligible for eviction.
void	setMinIdle(int minIdle) The minimum number of established connections that should be kept in the pool at all times.
void	setName(String name) Sets the name of the connection pool
void	setNumTestsPerEvictionRun(int numTestsPerEvictionRun) Property not used
void	setPassword(String password) Sets the password to establish the connection with.
void	setPort(int port) Sets the Cassandra port
void	setRemoveAbandoned(boolean removeAbandoned) boolean flag to remove abandoned connections if they exceed the removeAbandonedTimout.
void	setRemoveAbandonedTimeout(int removeAbandonedTimeout) The time in seconds before a connection can be considered abandoned.
void	setSocketTimeout(int socketTimeout) Sets the socket timeout in milliseconds
void	setSuspectTimeout(int seconds) Similar to PoolConfiguration.setRemoveAbandonedTimeout(int) but instead of treating the connection as abandoned, and potentially closing the connection, this simply logs the warning if PoolConfiguration.isLogAbandoned() returns true.
void	setTestOnBorrow(boolean testOnBorrow) The indication of whether objects will be validated before being borrowed from the pool.
void	setTestOnConnect(boolean testOnConnect) Set to true if we should run the validation query when connecting to the database for the first time on a connection.
void	setTestOnReturn(boolean testOnReturn) The indication of whether objects will be validated after being returned to the pool.
void	setTestWhileIdle(boolean testWhileIdle) Set to true if query validation should take place while the connection is idle.
void	setTimeBetweenEvictionRunsMillis(int timeBetweenEvictionRunsMillis) The number of milliseconds to sleep between runs of the idle connection validation, abandoned cleaner and idle pool resizing.
void	setUrl(String url) Sets the Cassandra connection URL.
void	setUseEquals(boolean useEquals) Set to true if you wish the ProxyConnection class to use String.equals instead of == when comparing method names.
void	setUseLock(boolean useLock) Set to true if a lock should be used when operations are performed on the connection object.
void	setUsername(String username) Sets the username used to establish the connection with
void	setValidationInterval(long validationInterval) avoid excess validation, only run validation at most at this frequency - time in milliseconds.
String	toString()

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Detail

poolCounter

protected static AtomicInteger poolCounter

url

protected String url

host

protected String host

configuredHosts

protected String[] configuredHosts

port

protected int port

framed

protected boolean framed

automaticHostDiscovery

protected boolean automaticHostDiscovery

failoverPolicy

protected HostFailoverPolicy failoverPolicy

socketTimeout

protected int socketTimeout

initialSize

protected int initialSize

maxActive

protected int maxActive

maxIdle

protected int maxIdle

minIdle

protected int minIdle

maxWait

protected int maxWait

testOnBorrow

protected boolean testOnBorrow

testOnReturn

protected boolean testOnReturn

testWhileIdle

protected boolean testWhileIdle

timeBetweenEvictionRunsMillis

protected int timeBetweenEvictionRunsMillis

numTestsPerEvictionRun

protected int numTestsPerEvictionRun

minEvictableIdleTimeMillis

protected int minEvictableIdleTimeMillis

accessToUnderlyingConnectionAllowed

protected final boolean accessToUnderlyingConnectionAllowed

See Also:

Constant Field Values

removeAbandoned

protected boolean removeAbandoned

removeAbandonedTimeout

protected int removeAbandonedTimeout

logAbandoned

protected boolean logAbandoned

name

protected String name

keySpace

protected String keySpace

password

protected String password

username

protected String username

validationInterval

protected long validationInterval

hostRetryInterval

protected long hostRetryInterval

jmxEnabled

protected boolean jmxEnabled

testOnConnect

protected boolean testOnConnect

fairQueue

protected boolean fairQueue

useEquals

protected boolean useEquals

abandonWhenPercentageFull

protected int abandonWhenPercentageFull

maxAge

protected long maxAge

useLock

protected boolean useLock

suspectTimeout

protected int suspectTimeout

Constructor Detail

PoolProperties

public PoolProperties()

Method Detail

getPropertyNames

public static Collection<String> getPropertyNames()

set

public void set(String name,
                Object value)

Description copied from interface: PoolConfiguration

Provides a generic setter for any of the declared properties of the PoolConfiguration

Specified by:

set in interface PoolConfiguration

Parameters:

name - the name of the property

value - the new value of the property

get

public Object get(String name)

Description copied from interface: PoolConfiguration

Provides a generic getter for any of the declared properties of the PoolConfiguration

Specified by:

get in interface PoolConfiguration

Parameters:

name - the name of the property

Returns:

the value of the property

setAbandonWhenPercentageFull

public void setAbandonWhenPercentageFull(int percentage)

Connections that have been abandoned (timed out) wont get closed and reported up unless the number of connections in use are above the percentage defined by abandonWhenPercentageFull. The value should be between 0-100. The default value is 0, which implies that connections are eligible for closure as soon as removeAbandonedTimeout has been reached.

Specified by:

setAbandonWhenPercentageFull in interface PoolConfiguration

Parameters:

percentage - a value between 0 and 100 to indicate when connections that have been abandoned/timed out are considered abandoned

getAbandonWhenPercentageFull

public int getAbandonWhenPercentageFull()

Connections that have been abandoned (timed out) wont get closed and reported up unless the number of connections in use are above the percentage defined by abandonWhenPercentageFull. The value should be between 0-100. The default value is 0, which implies that connections are eligible for closure as soon as removeAbandonedTimeout has been reached.

Specified by:

getAbandonWhenPercentageFull in interface PoolConfiguration

Returns:

percentage - a value between 0 and 100 to indicate when connections that have been abandoned/timed out are considered abandoned

isFairQueue

public boolean isFairQueue()

Returns true if a fair queue is being used by the connection pool

Specified by:

isFairQueue in interface PoolConfiguration

Returns:

true if a fair waiting queue is being used

setFairQueue

public void setFairQueue(boolean fairQueue)

Set to true if you wish that calls to getConnection should be treated fairly in a true FIFO fashion. This uses the FairBlockingQueue implementation for the list of the idle connections. The default value is true. This flag is required when you want to use asynchronous connection retrieval.

Specified by:

setFairQueue in interface PoolConfiguration

isAutomaticHostDiscovery

public boolean isAutomaticHostDiscovery()

Description copied from interface: PoolConfiguration

Returns whether automatic host discovery is being used

Specified by:

isAutomaticHostDiscovery in interface PoolConfiguration

Returns:

whether automatic host discovery is being used

setAutomaticHostDiscovery

public void setAutomaticHostDiscovery(boolean automaticHostDiscovery)

Description copied from interface: PoolConfiguration

Sets whether Cassandra hosts should be queried to automatically obtain a list of other hosts

Specified by:

setAutomaticHostDiscovery in interface PoolConfiguration

getInitialSize

public int getInitialSize()

Returns the number of connections that will be established when the connection pool is started. Default value is 10

Specified by:

getInitialSize in interface PoolConfiguration

Returns:

number of connections to be started when pool is started

isLogAbandoned

public boolean isLogAbandoned()

boolean flag to set if stack traces should be logged for application code which abandoned a Connection. Logging of abandoned Connections adds overhead for every Connection borrow because a stack trace has to be generated. The default value is false.

Specified by:

isLogAbandoned in interface PoolConfiguration

Returns:

true if the connection pool logs stack traces when connections are borrowed from the pool.

getMaxActive

public int getMaxActive()

The maximum number of active connections that can be allocated from this pool at the same time. The default value is 100

Specified by:

getMaxActive in interface PoolConfiguration

Returns:

the maximum number of connections used by this pool

getMaxIdle

public int getMaxIdle()

The maximum number of connections that should be kept in the idle pool if PoolConfiguration.isPoolSweeperEnabled() returns false. If the If PoolConfiguration.isPoolSweeperEnabled() returns true, then the idle pool can grow up to PoolConfiguration.getMaxActive() and will be shrunk according to PoolConfiguration.getMinEvictableIdleTimeMillis() setting. Default value is maxActive:100

Specified by:

getMaxIdle in interface PoolConfiguration

Returns:

the maximum number of idle connections.

getMaxWait

public int getMaxWait()

The maximum number of milliseconds that the pool will wait (when there are no available connections and the PoolConfiguration.getMaxActive() has been reached) for a connection to be returned before throwing an exception. Default value is 30000 (30 seconds)

Specified by:

getMaxWait in interface PoolConfiguration

Returns:

the number of milliseconds to wait for a connection to become available if the pool is maxed out.

getMinEvictableIdleTimeMillis

public int getMinEvictableIdleTimeMillis()

The minimum amount of time an object must sit idle in the pool before it is eligible for eviction. The default value is 60000 (60 seconds).

Specified by:

getMinEvictableIdleTimeMillis in interface PoolConfiguration

Returns:

the minimum amount of idle time in milliseconds before a connection is considered idle and eligible for eviction.

getMinIdle

public int getMinIdle()

The minimum number of established connections that should be kept in the pool at all times. The connection pool can shrink below this number if validation queries fail and connections get closed. Default value is derived from PoolConfiguration.getInitialSize() (also see PoolConfiguration.setTestWhileIdle(boolean) The idle pool will not shrink below this value during an eviction run, hence the number of actual connections can be between PoolConfiguration.getMinIdle() and somewhere between PoolConfiguration.getMaxIdle() and PoolConfiguration.getMaxActive()

Specified by:

getMinIdle in interface PoolConfiguration

Returns:

the minimum number of idle or established connections

getName

public String getName()

Returns the name of the connection pool. By default a JVM unique random name is assigned.

Specified by:

getName in interface PoolConfiguration

Returns:

the name of the pool, should be unique in a JVM

getNumTestsPerEvictionRun

public int getNumTestsPerEvictionRun()

Property not used

Specified by:

getNumTestsPerEvictionRun in interface PoolConfiguration

Returns:

unknown value

getPassword

public String getPassword()

Returns the password used when establishing connections to the database.

Specified by:

getPassword in interface PoolConfiguration

Returns:

the password in string format

getPoolName

public String getPoolName()

Specified by:

getPoolName in interface PoolConfiguration

Returns:

name

See Also:

PoolConfiguration.getName()

isRemoveAbandoned

public boolean isRemoveAbandoned()

boolean flag to remove abandoned connections if they exceed the removeAbandonedTimout. If set to true a connection is considered abandoned and eligible for removal if it has been in use longer than the PoolConfiguration.getRemoveAbandonedTimeout() and the condition for PoolConfiguration.getAbandonWhenPercentageFull() is met. Setting this to true can recover db connections from applications that fail to close a connection. See also PoolConfiguration.isLogAbandoned() The default value is false.

Specified by:

isRemoveAbandoned in interface PoolConfiguration

Returns:

true if abandoned connections can be closed and expelled out of the pool

getRemoveAbandonedTimeout

public int getRemoveAbandonedTimeout()

The time in seconds before a connection can be considered abandoned. The timer can be reset upon queries using an interceptor.

Specified by:

getRemoveAbandonedTimeout in interface PoolConfiguration

Returns:

the time in seconds before a used connection can be considered abandoned

isTestOnBorrow

public boolean isTestOnBorrow()

The indication of whether objects will be validated before being borrowed from the pool. If the object fails to validate, it will be dropped from the pool, and we will attempt to borrow another. NOTE - for a true value to have any effect, the validationQuery parameter must be set to a non-null string. Default value is false In order to have a more efficient validation, see PoolConfiguration.setValidationInterval(long)

Specified by:

isTestOnBorrow in interface PoolConfiguration

Returns:

true if the connection is to be validated upon borrowing a connection from the pool

See Also:

PoolConfiguration.getValidationInterval()

isTestOnReturn

public boolean isTestOnReturn()

The indication of whether objects will be validated after being returned to the pool. If the object fails to validate, it will be dropped from the pool. NOTE - for a true value to have any effect, the validationQuery parameter must be set to a non-null string. Default value is false In order to have a more efficient validation, see PoolConfiguration.setValidationInterval(long)

Specified by:

isTestOnReturn in interface PoolConfiguration

Returns:

true if validation should take place after a connection is returned to the pool

See Also:

PoolConfiguration.getValidationInterval()

isTestWhileIdle

public boolean isTestWhileIdle()

Set to true if query validation should take place while the connection is idle.

Specified by:

isTestWhileIdle in interface PoolConfiguration

Returns:

true if validation should take place during idle checks

See Also:

PoolConfiguration.setTimeBetweenEvictionRunsMillis(int)

getTimeBetweenEvictionRunsMillis

public int getTimeBetweenEvictionRunsMillis()

The number of milliseconds to sleep between runs of the idle connection validation, abandoned cleaner and idle pool resizing. This value should not be set under 1 second. It dictates how often we check for idle, abandoned connections, and how often we validate idle connection and resize the idle pool. The default value is 5000 (5 seconds)

Specified by:

getTimeBetweenEvictionRunsMillis in interface PoolConfiguration

Returns:

the sleep time in between validations in milliseconds

getUsername

public String getUsername()

Returns the username used to establish the connection with

Specified by:

getUsername in interface PoolConfiguration

Returns:

the username used to establish the connection with

getValidationInterval

public long getValidationInterval()

avoid excess validation, only run validation at most at this frequency - time in milliseconds. If a connection is due for validation, but has been validated previously within this interval, it will not be validated again. The default value is 30000 (30 seconds).

Specified by:

getValidationInterval in interface PoolConfiguration

Returns:

the validation interval in milliseconds

getHostRetryInterval

public long getHostRetryInterval()

Description copied from interface: PoolConfiguration

Returns the interval in milliseconds before retrying a host to which a connection has failed in the past. Default is 300000 (5 minutes)

Specified by:

getHostRetryInterval in interface PoolConfiguration

Returns:

milliseconds before host retry

isTestOnConnect

public boolean isTestOnConnect()

Returns true if we should run the validation query when connecting to the database for the first time on a connection. Normally this is always set to false.

Specified by:

isTestOnConnect in interface PoolConfiguration

Returns:

true if we should run the validation query upon connect

setInitialSize

public void setInitialSize(int initialSize)

Set the number of connections that will be established when the connection pool is started. Default value is 10. If this value exceeds PoolConfiguration.setMaxActive(int) it will automatically be lowered.

Specified by:

setInitialSize in interface PoolConfiguration

Parameters:

initialSize - the number of connections to be established.

setLogAbandoned

public void setLogAbandoned(boolean logAbandoned)

boolean flag to set if stack traces should be logged for application code which abandoned a Connection. Logging of abandoned Connections adds overhead for every Connection borrow because a stack trace has to be generated. The default value is false.

Specified by:

setLogAbandoned in interface PoolConfiguration

Parameters:

logAbandoned - set to true if stack traces should be recorded when DataSourceProxy.getConnection() is called.

setMaxActive

public void setMaxActive(int maxActive)

The maximum number of active connections that can be allocated from this pool at the same time. The default value is 100

Specified by:

setMaxActive in interface PoolConfiguration

Parameters:

maxActive - hard limit for number of managed connections by this pool

setMaxIdle

public void setMaxIdle(int maxIdle)

The maximum number of connections that should be kept in the idle pool if PoolConfiguration.isPoolSweeperEnabled() returns false. If the If PoolConfiguration.isPoolSweeperEnabled() returns true, then the idle pool can grow up to PoolConfiguration.getMaxActive() and will be shrunk according to PoolConfiguration.getMinEvictableIdleTimeMillis() setting. Default value is maxActive:100

Specified by:

setMaxIdle in interface PoolConfiguration

Parameters:

maxIdle - the maximum size of the idle pool

setMaxWait

public void setMaxWait(int maxWait)

The maximum number of milliseconds that the pool will wait (when there are no available connections and the PoolConfiguration.getMaxActive() has been reached) for a connection to be returned before throwing an exception. Default value is 30000 (30 seconds)

Specified by:

setMaxWait in interface PoolConfiguration

Parameters:

maxWait - the maximum number of milliseconds to wait.

setMinEvictableIdleTimeMillis

public void setMinEvictableIdleTimeMillis(int minEvictableIdleTimeMillis)

The minimum amount of time an object must sit idle in the pool before it is eligible for eviction. The default value is 60000 (60 seconds).

Specified by:

setMinEvictableIdleTimeMillis in interface PoolConfiguration

Parameters:

minEvictableIdleTimeMillis - the number of milliseconds a connection must be idle to be eligible for eviction.

setMinIdle

public void setMinIdle(int minIdle)

The minimum number of established connections that should be kept in the pool at all times. The connection pool can shrink below this number if validation queries fail and connections get closed. Default value is derived from PoolConfiguration.getInitialSize() (also see PoolConfiguration.setTestWhileIdle(boolean) The idle pool will not shrink below this value during an eviction run, hence the number of actual connections can be between PoolConfiguration.getMinIdle() and somewhere between PoolConfiguration.getMaxIdle() and PoolConfiguration.getMaxActive()

Specified by:

setMinIdle in interface PoolConfiguration

Parameters:

minIdle - the minimum number of idle or established connections

setName

public void setName(String name)

Sets the name of the connection pool

Specified by:

setName in interface PoolConfiguration

Parameters:

name - the name of the pool, should be unique in a runtime JVM

setNumTestsPerEvictionRun

public void setNumTestsPerEvictionRun(int numTestsPerEvictionRun)

Property not used

Specified by:

setNumTestsPerEvictionRun in interface PoolConfiguration

Parameters:

numTestsPerEvictionRun - parameter ignored.

setPassword

public void setPassword(String password)

Sets the password to establish the connection with.

Specified by:

setPassword in interface PoolConfiguration

setRemoveAbandoned

public void setRemoveAbandoned(boolean removeAbandoned)

boolean flag to remove abandoned connections if they exceed the removeAbandonedTimout. If set to true a connection is considered abandoned and eligible for removal if it has been in use longer than the PoolConfiguration.getRemoveAbandonedTimeout() and the condition for PoolConfiguration.getAbandonWhenPercentageFull() is met. Setting this to true can recover db connections from applications that fail to close a connection. See also PoolConfiguration.isLogAbandoned() The default value is false.

Specified by:

setRemoveAbandoned in interface PoolConfiguration

Parameters:

removeAbandoned - set to true if abandoned connections can be closed and expelled out of the pool

setRemoveAbandonedTimeout

public void setRemoveAbandonedTimeout(int removeAbandonedTimeout)

The time in seconds before a connection can be considered abandoned. The timer can be reset upon queries using an interceptor.

Specified by:

setRemoveAbandonedTimeout in interface PoolConfiguration

Parameters:

removeAbandonedTimeout - the time in seconds before a used connection can be considered abandoned *

setTestOnBorrow

public void setTestOnBorrow(boolean testOnBorrow)

The indication of whether objects will be validated before being borrowed from the pool. If the object fails to validate, it will be dropped from the pool, and we will attempt to borrow another. NOTE - for a true value to have any effect, the validationQuery parameter must be set to a non-null string. Default value is false In order to have a more efficient validation, see PoolConfiguration.setValidationInterval(long)

Specified by:

setTestOnBorrow in interface PoolConfiguration

Parameters:

testOnBorrow - set to true if validation should take place before a connection is handed out to the application

See Also:

PoolConfiguration.getValidationInterval()

setTestWhileIdle

public void setTestWhileIdle(boolean testWhileIdle)

Set to true if query validation should take place while the connection is idle.

Specified by:

setTestWhileIdle in interface PoolConfiguration

Parameters:

testWhileIdle - true if validation should take place during idle checks

See Also:

PoolConfiguration.setTimeBetweenEvictionRunsMillis(int)

setTestOnReturn

public void setTestOnReturn(boolean testOnReturn)

The indication of whether objects will be validated after being returned to the pool. If the object fails to validate, it will be dropped from the pool. NOTE - for a true value to have any effect, the validationQuery parameter must be set to a non-null string. Default value is false In order to have a more efficient validation, see PoolConfiguration.setValidationInterval(long)

Specified by:

setTestOnReturn in interface PoolConfiguration

Parameters:

testOnReturn - true if validation should take place after a connection is returned to the pool

See Also:

PoolConfiguration.getValidationInterval()

setTimeBetweenEvictionRunsMillis

public void setTimeBetweenEvictionRunsMillis(int timeBetweenEvictionRunsMillis)

The number of milliseconds to sleep between runs of the idle connection validation, abandoned cleaner and idle pool resizing. This value should not be set under 1 second. It dictates how often we check for idle, abandoned connections, and how often we validate idle connection and resize the idle pool. The default value is 5000 (5 seconds)

Specified by:

setTimeBetweenEvictionRunsMillis in interface PoolConfiguration

Parameters:

timeBetweenEvictionRunsMillis - the sleep time in between validations in milliseconds

getKeySpace

public String getKeySpace()

Returns the keyspace

Specified by:

getKeySpace in interface PoolConfiguration

setKeySpace

public void setKeySpace(String keySpace)

Sets the keyspace

Specified by:

setKeySpace in interface PoolConfiguration

setUsername

public void setUsername(String username)

Sets the username used to establish the connection with

Specified by:

setUsername in interface PoolConfiguration

setValidationInterval

public void setValidationInterval(long validationInterval)

avoid excess validation, only run validation at most at this frequency - time in milliseconds. If a connection is due for validation, but has been validated previously within this interval, it will not be validated again. The default value is 30000 (30 seconds).

Specified by:

setValidationInterval in interface PoolConfiguration

Parameters:

validationInterval - the validation interval in milliseconds

setTestOnConnect

public void setTestOnConnect(boolean testOnConnect)

Set to true if we should run the validation query when connecting to the database for the first time on a connection. Normally this is always set to false.

Specified by:

setTestOnConnect in interface PoolConfiguration

Parameters:

testOnConnect - set to true if we should run the validation query upon connect

toString

public String toString()

Overrides:

toString in class Object

getPoolCounter

public static int getPoolCounter()

isJmxEnabled

public boolean isJmxEnabled()

If set to true, the connection pool creates a ConnectionPoolMBean object that can be registered with JMX to receive notifications and state about the pool. The ConnectionPool object doesn't register itself, as there is no way to keep a static non changing ObjectName across JVM restarts.

Specified by:

isJmxEnabled in interface PoolConfiguration

Returns:

true if the mbean object will be created upon startup.

setJmxEnabled

public void setJmxEnabled(boolean jmxEnabled)

If set to true, the connection pool creates a ConnectionPoolMBean object that can be registered with JMX to receive notifications and state about the pool. The ConnectionPool object doesn't register itself, as there is no way to keep a static non changing ObjectName across JVM restarts.

Specified by:

setJmxEnabled in interface PoolConfiguration

Parameters:

jmxEnabled - set to to if the mbean object should be created upon startup.

getSuspectTimeout

public int getSuspectTimeout()

Returns the time in seconds to pass before a connection is marked an abanoned suspect. Any value lesser than or equal to 0 means the check is disabled.

Specified by:

getSuspectTimeout in interface PoolConfiguration

Returns:

Returns the time in seconds to pass before a connection is marked an abanoned suspect.

setSuspectTimeout

public void setSuspectTimeout(int seconds)

Similar to PoolConfiguration.setRemoveAbandonedTimeout(int) but instead of treating the connection as abandoned, and potentially closing the connection, this simply logs the warning if PoolConfiguration.isLogAbandoned() returns true. If this value is equal or less than 0, no suspect checking will be performed. Suspect checking only takes place if the timeout value is larger than 0 and the connection was not abandoned or if abandon check is disabled. If a connection is suspect a WARN message gets logged and a JMX notification gets sent once.

Specified by:

setSuspectTimeout in interface PoolConfiguration

Parameters:

seconds - - the amount of time in seconds that has to pass before a connection is marked suspect.

isPoolSweeperEnabled

public boolean isPoolSweeperEnabled()

Returns true if the pool sweeper is enabled for the connection pool. The pool sweeper is enabled if any settings that require async intervention in the pool are turned on boolean result = getTimeBetweenEvictionRunsMillis()>0; result = result && (isRemoveAbandoned() && getRemoveAbandonedTimeout()>0); result = result || (isTestWhileIdle() && getValidationQuery()!=null); return result;

Specified by:

isPoolSweeperEnabled in interface PoolConfiguration

Returns:

true if a background thread is or will be enabled for this pool

isUseEquals

public boolean isUseEquals()

Set to true if you wish the ProxyConnection class to use String.equals instead of == when comparing method names. This property does not apply to added interceptors as those are configured individually. The default value is false.

Specified by:

isUseEquals in interface PoolConfiguration

Returns:

true if pool uses String.equals(Object) instead of == when comparing method names on Connection methods

setUseEquals

public void setUseEquals(boolean useEquals)

Set to true if you wish the ProxyConnection class to use String.equals instead of == when comparing method names. This property does not apply to added interceptors as those are configured individually. The default value is false.

Specified by:

setUseEquals in interface PoolConfiguration

Parameters:

useEquals - set to true if the pool should use String.equals(Object) instead of == when comparing method names on Connection methods

getMaxAge

public long getMaxAge()

Time in milliseconds to keep this connection alive even when used. When a connection is returned to the pool, the pool will check to see if the ((now - time-when-connected) > maxAge) has been reached, and if so, it closes the connection rather than returning it to the pool. The default value is 0, which implies that connections will be left open and no age check will be done upon returning the connection to the pool. This is a useful setting for database sessions that leak memory as it ensures that the session will have a finite life span.

Specified by:

getMaxAge in interface PoolConfiguration

Returns:

the time in milliseconds a connection will be open for when used

setMaxAge

public void setMaxAge(long maxAge)

Time in milliseconds to keep this connection alive even when used. When a connection is returned to the pool, the pool will check to see if the ((now - time-when-connected) > maxAge) has been reached, and if so, it closes the connection rather than returning it to the pool. The default value is 0, which implies that connections will be left open and no age check will be done upon returning the connection to the pool. This is a useful setting for database sessions that leak memory as it ensures that the session will have a finite life span.

Specified by:

setMaxAge in interface PoolConfiguration

Parameters:

maxAge - the time in milliseconds a connection will be open for when used

getUseLock

public boolean getUseLock()

Return true if a lock should be used when operations are performed on the connection object. Should be set to false unless you plan to have a background thread of your own doing idle and abandon checking such as JMX clients. If the pool sweeper is enabled, then the lock will automatically be used regardless of this setting.

Specified by:

getUseLock in interface PoolConfiguration

Returns:

true if a lock is used.

setUseLock

public void setUseLock(boolean useLock)

Set to true if a lock should be used when operations are performed on the connection object. Should be set to false unless you plan to have a background thread of your own doing idle and abandon checking such as JMX clients. If the pool sweeper is enabled, then the lock will automatically be used regardless of this setting.

Specified by:

setUseLock in interface PoolConfiguration

Parameters:

useLock - set to true if a lock should be used on connection operations

getProperties

public static Map<String,String> getProperties(String propText,
                                               Map<String,String> props)

setHost

public void setHost(String host)

Description copied from interface: PoolConfiguration

Sets the Cassandra host. May be a comma-separated list of addresses

Specified by:

setHost in interface PoolConfiguration

getHost

public String getHost()

Description copied from interface: PoolConfiguration

Returns the Cassandra hosts

Specified by:

getHost in interface PoolConfiguration

Returns:

a single string representing the Cassandra host addresses separated by commas

getUrl

public String getUrl()

Description copied from interface: PoolConfiguration

Returns the Cassandra connection URL

Specified by:

getUrl in interface PoolConfiguration

Returns:

setUrl

public void setUrl(String url)

Description copied from interface: PoolConfiguration

Sets the Cassandra connection URL. The url is in the form cassandra:thrift://[host]:[port]

Specified by:

setUrl in interface PoolConfiguration

setPort

public void setPort(int port)

Description copied from interface: PoolConfiguration

Sets the Cassandra port

Specified by:

setPort in interface PoolConfiguration

getPort

public int getPort()

Description copied from interface: PoolConfiguration

Returns the Cassandra port (defaults to 9160)

Specified by:

getPort in interface PoolConfiguration

Returns:

the Cassandra port

setFramed

public void setFramed(boolean framed)

Description copied from interface: PoolConfiguration

Sets whether to use framed connection mode (default false)

Specified by:

setFramed in interface PoolConfiguration

isFramed

public boolean isFramed()

Description copied from interface: PoolConfiguration

Returns whether framed connection mode is being used

Specified by:

isFramed in interface PoolConfiguration

Returns:

whether framed connection mode is being used

getSocketTimeout

public int getSocketTimeout()

Description copied from interface: PoolConfiguration

Returns the socket timeout in milliseconds

Specified by:

getSocketTimeout in interface PoolConfiguration

Returns:

the socket timeout in milliseconds

setSocketTimeout

public void setSocketTimeout(int socketTimeout)

Description copied from interface: PoolConfiguration

Sets the socket timeout in milliseconds

Specified by:

setSocketTimeout in interface PoolConfiguration

getConfiguredHosts

public String[] getConfiguredHosts()

Description copied from interface: PoolConfiguration

Returns an array of configured hosts (may be different from the actual list if dynamic discovery is enabled)

Specified by:

getConfiguredHosts in interface PoolConfiguration

Returns:

an array of strings representing the addresses of the configured Cassandra hosts

setHostRetryInterval

public void setHostRetryInterval(long hostRetryInterval)

Description copied from interface: PoolConfiguration

Sets the interval in milliseconds before retrying a host to which a connection has failed in the past.

Specified by:

setHostRetryInterval in interface PoolConfiguration

Parameters:

hostRetryInterval - number of millieseconds before retrying a host

setFailoverPolicy

public void setFailoverPolicy(HostFailoverPolicy failoverPolicy)

Description copied from interface: PoolConfiguration

Sets the host failover policy, i.e. what to do when connecting to a host fails

Specified by:

setFailoverPolicy in interface PoolConfiguration

getFailoverPolicy

public HostFailoverPolicy getFailoverPolicy()

Description copied from interface: PoolConfiguration

Returns the failover policy.

Specified by:

getFailoverPolicy in interface PoolConfiguration

Returns:

the failover policy

setDataSourceJNDI

public void setDataSourceJNDI(String jndiDS)

Description copied from interface: PoolConfiguration

Configure the connection pool to use a DataSource according to PoolConfiguration.setDataSource(Object) But instead of injecting the object, specify the JNDI location. After a successful JNDI look, the PoolConfiguration.getDataSource() will not return null.

Specified by:

setDataSourceJNDI in interface PoolConfiguration

Parameters:

jndiDS - -the JNDI string @TODO specify the rules here.

getDataSourceJNDI

public String getDataSourceJNDI()

Description copied from interface: PoolConfiguration

Returns the JNDI string configured for data source usage.

Specified by:

getDataSourceJNDI in interface PoolConfiguration

Returns:

the JNDI string or null if not set

setDataSource

public void setDataSource(Object ds)

Description copied from interface: PoolConfiguration

Injects a datasource that will be used to retrieve/create connections.

Specified by:

setDataSource in interface PoolConfiguration

Parameters:

ds - the DataSource to be used for creating connections to be pooled.

getDataSource

public Object getDataSource()

Description copied from interface: PoolConfiguration

Returns a datasource, if one exists that is being used to create connections.

Specified by:

getDataSource in interface PoolConfiguration

Returns:

the datasource object