Package io.envoyproxy.envoy.api.v2.route

Class RouteMatch.Builder

  • All Implemented Interfaces:
    com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, RouteMatchOrBuilder, Cloneable
    Enclosing class:
    RouteMatch
    public static final class RouteMatch.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>
implements RouteMatchOrBuilder
     [#next-free-field: 12]
    Protobuf type envoy.api.v2.route.RouteMatch

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • clear

        public RouteMatch.Builder clear()
        Specified by:
        clear in interface com.google.protobuf.Message.Builder
        Specified by:
        clear in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clear in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • getDefaultInstanceForType

        public RouteMatch getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public RouteMatch build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public RouteMatch buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • clone

        public RouteMatch.Builder clone()
        Specified by:
        clone in interface com.google.protobuf.Message.Builder
        Specified by:
        clone in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clone in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • setField

        public RouteMatch.Builder setField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                   Object value)
        Specified by:
        setField in interface com.google.protobuf.Message.Builder
        Overrides:
        setField in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • clearField

        public RouteMatch.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        Specified by:
        clearField in interface com.google.protobuf.Message.Builder
        Overrides:
        clearField in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • clearOneof

        public RouteMatch.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        Specified by:
        clearOneof in interface com.google.protobuf.Message.Builder
        Overrides:
        clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • setRepeatedField

        public RouteMatch.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                           int index,
                                           Object value)
        Specified by:
        setRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • addRepeatedField

        public RouteMatch.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                           Object value)
        Specified by:
        addRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • mergeFrom

        public RouteMatch.Builder mergeFrom​(com.google.protobuf.Message other)
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<RouteMatch.Builder>

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • mergeFrom

        public RouteMatch.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                    com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                             throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<RouteMatch.Builder>
        Throws:
        IOException

      • hasPrefix

        public boolean hasPrefix()
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Specified by:
        hasPrefix in interface RouteMatchOrBuilder
        Returns:
        Whether the prefix field is set.

      • getPrefix

        public String getPrefix()
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Specified by:
        getPrefix in interface RouteMatchOrBuilder
        Returns:
        The prefix.

      • getPrefixBytes

        public com.google.protobuf.ByteString getPrefixBytes()
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Specified by:
        getPrefixBytes in interface RouteMatchOrBuilder
        Returns:
        The bytes for prefix.

      • setPrefix

        public RouteMatch.Builder setPrefix​(String value)
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Parameters:
        value - The prefix to set.
        Returns:
        This builder for chaining.

      • clearPrefix

        public RouteMatch.Builder clearPrefix()
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Returns:
        This builder for chaining.

      • setPrefixBytes

        public RouteMatch.Builder setPrefixBytes​(com.google.protobuf.ByteString value)
         If specified, the route is a prefix rule meaning that the prefix must
 match the beginning of the *:path* header.
        string prefix = 1;
        Parameters:
        value - The bytes for prefix to set.
        Returns:
        This builder for chaining.

      • hasPath

        public boolean hasPath()
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Specified by:
        hasPath in interface RouteMatchOrBuilder
        Returns:
        Whether the path field is set.

      • getPath

        public String getPath()
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Specified by:
        getPath in interface RouteMatchOrBuilder
        Returns:
        The path.

      • getPathBytes

        public com.google.protobuf.ByteString getPathBytes()
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Specified by:
        getPathBytes in interface RouteMatchOrBuilder
        Returns:
        The bytes for path.

      • setPath

        public RouteMatch.Builder setPath​(String value)
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Parameters:
        value - The path to set.
        Returns:
        This builder for chaining.

      • clearPath

        public RouteMatch.Builder clearPath()
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Returns:
        This builder for chaining.

      • setPathBytes

        public RouteMatch.Builder setPathBytes​(com.google.protobuf.ByteString value)
         If specified, the route is an exact path rule meaning that the path must
 exactly match the *:path* header once the query string is removed.
        string path = 2;
        Parameters:
        value - The bytes for path to set.
        Returns:
        This builder for chaining.

      • hasRegex

        @Deprecated
public boolean hasRegex()
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Specified by:
        hasRegex in interface RouteMatchOrBuilder
        Returns:
        Whether the regex field is set.

      • getRegex

        @Deprecated
public String getRegex()
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Specified by:
        getRegex in interface RouteMatchOrBuilder
        Returns:
        The regex.

      • getRegexBytes

        @Deprecated
public com.google.protobuf.ByteString getRegexBytes()
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Specified by:
        getRegexBytes in interface RouteMatchOrBuilder
        Returns:
        The bytes for regex.

      • setRegex

        @Deprecated
public RouteMatch.Builder setRegex​(String value)
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Parameters:
        value - The regex to set.
        Returns:
        This builder for chaining.

      • clearRegex

        @Deprecated
public RouteMatch.Builder clearRegex()
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Returns:
        This builder for chaining.

      • setRegexBytes

        @Deprecated
public RouteMatch.Builder setRegexBytes​(com.google.protobuf.ByteString value)
        Deprecated.
        envoy.api.v2.route.RouteMatch.regex is deprecated. See envoy/api/v2/route/route_components.proto;l=418
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex. The regex grammar is defined `here
 <https://en.cppreference.com/w/cpp/regex/ecmascript>`_.
 Examples:
 * The regex ``/b[io]t`` matches the path */bit*
 * The regex ``/b[io]t`` matches the path */bot*
 * The regex ``/b[io]t`` does not match the path */bite*
 * The regex ``/b[io]t`` does not match the path */bit/bot*
 .. attention::
   This field has been deprecated in favor of `safe_regex` as it is not safe for use with
   untrusted input in all cases.
        string regex = 3 [deprecated = true, (.validate.rules) = { ... }
        Parameters:
        value - The bytes for regex to set.
        Returns:
        This builder for chaining.

      • hasSafeRegex

        public boolean hasSafeRegex()
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }
        Specified by:
        hasSafeRegex in interface RouteMatchOrBuilder
        Returns:
        Whether the safeRegex field is set.

      • getSafeRegex

        public RegexMatcher getSafeRegex()
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }
        Specified by:
        getSafeRegex in interface RouteMatchOrBuilder
        Returns:
        The safeRegex.

      • setSafeRegex

        public RouteMatch.Builder setSafeRegex​(RegexMatcher value)
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }

      • setSafeRegex

        public RouteMatch.Builder setSafeRegex​(RegexMatcher.Builder builderForValue)
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }

      • mergeSafeRegex

        public RouteMatch.Builder mergeSafeRegex​(RegexMatcher value)
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }

      • clearSafeRegex

        public RouteMatch.Builder clearSafeRegex()
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }

      • getSafeRegexBuilder

        public RegexMatcher.Builder getSafeRegexBuilder()
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }

      • getSafeRegexOrBuilder

        public RegexMatcherOrBuilder getSafeRegexOrBuilder()
         If specified, the route is a regular expression rule meaning that the
 regex must match the *:path* header once the query string is removed. The entire path
 (without the query string) must match the regex. The rule will not match if only a
 subsequence of the *:path* header matches the regex.
 [#next-major-version: In the v3 API we should redo how path specification works such
 that we utilize StringMatcher, and additionally have consistent options around whether we
 strip query strings, do a case sensitive match, etc. In the interim it will be too disruptive
 to deprecate the existing options. We should even consider whether we want to do away with
 path_specifier entirely and just rely on a set of header matchers which can already match
 on :path, etc. The issue with that is it is unclear how to generically deal with query string
 stripping. This needs more thought.]
        .envoy.type.matcher.RegexMatcher safe_regex = 10 [(.validate.rules) = { ... }
        Specified by:
        getSafeRegexOrBuilder in interface RouteMatchOrBuilder

      • hasCaseSensitive

        public boolean hasCaseSensitive()
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;
        Specified by:
        hasCaseSensitive in interface RouteMatchOrBuilder
        Returns:
        Whether the caseSensitive field is set.

      • getCaseSensitive

        public com.google.protobuf.BoolValue getCaseSensitive()
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;
        Specified by:
        getCaseSensitive in interface RouteMatchOrBuilder
        Returns:
        The caseSensitive.

      • setCaseSensitive

        public RouteMatch.Builder setCaseSensitive​(com.google.protobuf.BoolValue value)
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;

      • setCaseSensitive

        public RouteMatch.Builder setCaseSensitive​(com.google.protobuf.BoolValue.Builder builderForValue)
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;

      • mergeCaseSensitive

        public RouteMatch.Builder mergeCaseSensitive​(com.google.protobuf.BoolValue value)
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;

      • clearCaseSensitive

        public RouteMatch.Builder clearCaseSensitive()
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;

      • getCaseSensitiveBuilder

        public com.google.protobuf.BoolValue.Builder getCaseSensitiveBuilder()
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;

      • getCaseSensitiveOrBuilder

        public com.google.protobuf.BoolValueOrBuilder getCaseSensitiveOrBuilder()
         Indicates that prefix/path matching should be case sensitive. The default
 is true.
        .google.protobuf.BoolValue case_sensitive = 4;
        Specified by:
        getCaseSensitiveOrBuilder in interface RouteMatchOrBuilder

      • hasRuntimeFraction

        public boolean hasRuntimeFraction()
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;
        Specified by:
        hasRuntimeFraction in interface RouteMatchOrBuilder
        Returns:
        Whether the runtimeFraction field is set.

      • getRuntimeFraction

        public RuntimeFractionalPercent getRuntimeFraction()
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;
        Specified by:
        getRuntimeFraction in interface RouteMatchOrBuilder
        Returns:
        The runtimeFraction.

      • setRuntimeFraction

        public RouteMatch.Builder setRuntimeFraction​(RuntimeFractionalPercent value)
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;

      • setRuntimeFraction

        public RouteMatch.Builder setRuntimeFraction​(RuntimeFractionalPercent.Builder builderForValue)
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;

      • mergeRuntimeFraction

        public RouteMatch.Builder mergeRuntimeFraction​(RuntimeFractionalPercent value)
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;

      • clearRuntimeFraction

        public RouteMatch.Builder clearRuntimeFraction()
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;

      • getRuntimeFractionBuilder

        public RuntimeFractionalPercent.Builder getRuntimeFractionBuilder()
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;

      • getRuntimeFractionOrBuilder

        public RuntimeFractionalPercentOrBuilder getRuntimeFractionOrBuilder()
         Indicates that the route should additionally match on a runtime key. Every time the route
 is considered for a match, it must also fall under the percentage of matches indicated by
 this field. For some fraction N/D, a random number in the range [0,D) is selected. If the
 number is <= the value of the numerator N, or if the key is not present, the default
 value, the router continues to evaluate the remaining match criteria. A runtime_fraction
 route configuration can be used to roll out route changes in a gradual manner without full
 code/config deploys. Refer to the :ref:`traffic shifting
 <config_http_conn_man_route_table_traffic_splitting_shift>` docs for additional documentation.
 .. note::
    Parsing this field is implemented such that the runtime key's data may be represented
    as a FractionalPercent proto represented as JSON/YAML and may also be represented as an
    integer with the assumption that the value is an integral percentage out of 100. For
    instance, a runtime key lookup returning the value "42" would parse as a FractionalPercent
    whose numerator is 42 and denominator is HUNDRED. This preserves legacy semantics.
        .envoy.api.v2.core.RuntimeFractionalPercent runtime_fraction = 9;
        Specified by:
        getRuntimeFractionOrBuilder in interface RouteMatchOrBuilder

      • getHeadersList

        public List<HeaderMatcher> getHeadersList()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;
        Specified by:
        getHeadersList in interface RouteMatchOrBuilder

      • getHeadersCount

        public int getHeadersCount()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;
        Specified by:
        getHeadersCount in interface RouteMatchOrBuilder

      • getHeaders

        public HeaderMatcher getHeaders​(int index)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;
        Specified by:
        getHeaders in interface RouteMatchOrBuilder

      • setHeaders

        public RouteMatch.Builder setHeaders​(int index,
                                     HeaderMatcher value)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • setHeaders

        public RouteMatch.Builder setHeaders​(int index,
                                     HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addHeaders

        public RouteMatch.Builder addHeaders​(HeaderMatcher value)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addHeaders

        public RouteMatch.Builder addHeaders​(int index,
                                     HeaderMatcher value)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addHeaders

        public RouteMatch.Builder addHeaders​(HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addHeaders

        public RouteMatch.Builder addHeaders​(int index,
                                     HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addAllHeaders

        public RouteMatch.Builder addAllHeaders​(Iterable<? extends HeaderMatcher> values)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • clearHeaders

        public RouteMatch.Builder clearHeaders()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • removeHeaders

        public RouteMatch.Builder removeHeaders​(int index)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • getHeadersBuilder

        public HeaderMatcher.Builder getHeadersBuilder​(int index)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • getHeadersOrBuilder

        public HeaderMatcherOrBuilder getHeadersOrBuilder​(int index)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;
        Specified by:
        getHeadersOrBuilder in interface RouteMatchOrBuilder

      • getHeadersOrBuilderList

        public List<? extends HeaderMatcherOrBuilder> getHeadersOrBuilderList()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;
        Specified by:
        getHeadersOrBuilderList in interface RouteMatchOrBuilder

      • addHeadersBuilder

        public HeaderMatcher.Builder addHeadersBuilder()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • addHeadersBuilder

        public HeaderMatcher.Builder addHeadersBuilder​(int index)
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • getHeadersBuilderList

        public List<HeaderMatcher.Builder> getHeadersBuilderList()
         Specifies a set of headers that the route should match on. The router will
 check the request’s headers against all the specified headers in the route
 config. A match will happen if all the headers in the route are present in
 the request with the same values (or based on presence if the value field
 is not in the config).
        repeated .envoy.api.v2.route.HeaderMatcher headers = 6;

      • getQueryParametersList

        public List<QueryParameterMatcher> getQueryParametersList()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;
        Specified by:
        getQueryParametersList in interface RouteMatchOrBuilder

      • getQueryParametersCount

        public int getQueryParametersCount()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;
        Specified by:
        getQueryParametersCount in interface RouteMatchOrBuilder

      • getQueryParameters

        public QueryParameterMatcher getQueryParameters​(int index)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;
        Specified by:
        getQueryParameters in interface RouteMatchOrBuilder

      • setQueryParameters

        public RouteMatch.Builder setQueryParameters​(int index,
                                             QueryParameterMatcher value)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • setQueryParameters

        public RouteMatch.Builder setQueryParameters​(int index,
                                             QueryParameterMatcher.Builder builderForValue)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addQueryParameters

        public RouteMatch.Builder addQueryParameters​(QueryParameterMatcher value)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addQueryParameters

        public RouteMatch.Builder addQueryParameters​(int index,
                                             QueryParameterMatcher value)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addQueryParameters

        public RouteMatch.Builder addQueryParameters​(QueryParameterMatcher.Builder builderForValue)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addQueryParameters

        public RouteMatch.Builder addQueryParameters​(int index,
                                             QueryParameterMatcher.Builder builderForValue)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addAllQueryParameters

        public RouteMatch.Builder addAllQueryParameters​(Iterable<? extends QueryParameterMatcher> values)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • clearQueryParameters

        public RouteMatch.Builder clearQueryParameters()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • removeQueryParameters

        public RouteMatch.Builder removeQueryParameters​(int index)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • getQueryParametersBuilder

        public QueryParameterMatcher.Builder getQueryParametersBuilder​(int index)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • getQueryParametersOrBuilder

        public QueryParameterMatcherOrBuilder getQueryParametersOrBuilder​(int index)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;
        Specified by:
        getQueryParametersOrBuilder in interface RouteMatchOrBuilder

      • getQueryParametersOrBuilderList

        public List<? extends QueryParameterMatcherOrBuilder> getQueryParametersOrBuilderList()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;
        Specified by:
        getQueryParametersOrBuilderList in interface RouteMatchOrBuilder

      • addQueryParametersBuilder

        public QueryParameterMatcher.Builder addQueryParametersBuilder()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • addQueryParametersBuilder

        public QueryParameterMatcher.Builder addQueryParametersBuilder​(int index)
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • getQueryParametersBuilderList

        public List<QueryParameterMatcher.Builder> getQueryParametersBuilderList()
         Specifies a set of URL query parameters on which the route should
 match. The router will check the query string from the *path* header
 against all the specified query parameters. If the number of specified
 query parameters is nonzero, they all must match the *path* header's
 query string for a match to occur.
        repeated .envoy.api.v2.route.QueryParameterMatcher query_parameters = 7;

      • hasGrpc

        public boolean hasGrpc()
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;
        Specified by:
        hasGrpc in interface RouteMatchOrBuilder
        Returns:
        Whether the grpc field is set.

      • getGrpc

        public RouteMatch.GrpcRouteMatchOptions getGrpc()
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;
        Specified by:
        getGrpc in interface RouteMatchOrBuilder
        Returns:
        The grpc.

      • setGrpc

        public RouteMatch.Builder setGrpc​(RouteMatch.GrpcRouteMatchOptions value)
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;

      • setGrpc

        public RouteMatch.Builder setGrpc​(RouteMatch.GrpcRouteMatchOptions.Builder builderForValue)
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;

      • mergeGrpc

        public RouteMatch.Builder mergeGrpc​(RouteMatch.GrpcRouteMatchOptions value)
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;

      • clearGrpc

        public RouteMatch.Builder clearGrpc()
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;

      • getGrpcBuilder

        public RouteMatch.GrpcRouteMatchOptions.Builder getGrpcBuilder()
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;

      • getGrpcOrBuilder

        public RouteMatch.GrpcRouteMatchOptionsOrBuilder getGrpcOrBuilder()
         If specified, only gRPC requests will be matched. The router will check
 that the content-type header has a application/grpc or one of the various
 application/grpc+ values.
        .envoy.api.v2.route.RouteMatch.GrpcRouteMatchOptions grpc = 8;
        Specified by:
        getGrpcOrBuilder in interface RouteMatchOrBuilder

      • hasTlsContext

        public boolean hasTlsContext()
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;
        Specified by:
        hasTlsContext in interface RouteMatchOrBuilder
        Returns:
        Whether the tlsContext field is set.

      • getTlsContext

        public RouteMatch.TlsContextMatchOptions getTlsContext()
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;
        Specified by:
        getTlsContext in interface RouteMatchOrBuilder
        Returns:
        The tlsContext.

      • setTlsContext

        public RouteMatch.Builder setTlsContext​(RouteMatch.TlsContextMatchOptions value)
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;

      • setTlsContext

        public RouteMatch.Builder setTlsContext​(RouteMatch.TlsContextMatchOptions.Builder builderForValue)
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;

      • mergeTlsContext

        public RouteMatch.Builder mergeTlsContext​(RouteMatch.TlsContextMatchOptions value)
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;

      • clearTlsContext

        public RouteMatch.Builder clearTlsContext()
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;

      • getTlsContextBuilder

        public RouteMatch.TlsContextMatchOptions.Builder getTlsContextBuilder()
         If specified, the client tls context will be matched against the defined
 match options.
 [#next-major-version: unify with RBAC]
        .envoy.api.v2.route.RouteMatch.TlsContextMatchOptions tls_context = 11;

      • setUnknownFields

        public final RouteMatch.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>

      • mergeUnknownFields

        public final RouteMatch.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<RouteMatch.Builder>