Package io.envoyproxy.envoy.config.endpoint.v3

Interface ClusterLoadAssignment.PolicyOrBuilder

    • Method Detail

      • getDropOverloadsList

        List<ClusterLoadAssignment.Policy.DropOverload> getDropOverloadsList()
         Action to trim the overall incoming traffic to protect the upstream
 hosts. This action allows protection in case the hosts are unable to
 recover from an outage, or unable to autoscale or unable to handle
 incoming traffic volume for any reason.
 At the client each category is applied one after the other to generate
 the 'actual' drop percentage on all outgoing traffic. For example:
 .. code-block:: json
  { "drop_overloads": [
      { "category": "throttle", "drop_percentage": 60 }
      { "category": "lb", "drop_percentage": 50 }
  ]}
 The actual drop percentages applied to the traffic at the clients will be
    "throttle"_drop = 60%
    "lb"_drop = 20%  // 50% of the remaining 'actual' load, which is 40%.
    actual_outgoing_load = 20% // remaining after applying all categories.
 [#not-implemented-hide:]
        repeated .envoy.config.endpoint.v3.ClusterLoadAssignment.Policy.DropOverload drop_overloads = 2;

      • getDropOverloads

        ClusterLoadAssignment.Policy.DropOverload getDropOverloads​(int index)
         Action to trim the overall incoming traffic to protect the upstream
 hosts. This action allows protection in case the hosts are unable to
 recover from an outage, or unable to autoscale or unable to handle
 incoming traffic volume for any reason.
 At the client each category is applied one after the other to generate
 the 'actual' drop percentage on all outgoing traffic. For example:
 .. code-block:: json
  { "drop_overloads": [
      { "category": "throttle", "drop_percentage": 60 }
      { "category": "lb", "drop_percentage": 50 }
  ]}
 The actual drop percentages applied to the traffic at the clients will be
    "throttle"_drop = 60%
    "lb"_drop = 20%  // 50% of the remaining 'actual' load, which is 40%.
    actual_outgoing_load = 20% // remaining after applying all categories.
 [#not-implemented-hide:]
        repeated .envoy.config.endpoint.v3.ClusterLoadAssignment.Policy.DropOverload drop_overloads = 2;

      • getDropOverloadsCount

        int getDropOverloadsCount()
         Action to trim the overall incoming traffic to protect the upstream
 hosts. This action allows protection in case the hosts are unable to
 recover from an outage, or unable to autoscale or unable to handle
 incoming traffic volume for any reason.
 At the client each category is applied one after the other to generate
 the 'actual' drop percentage on all outgoing traffic. For example:
 .. code-block:: json
  { "drop_overloads": [
      { "category": "throttle", "drop_percentage": 60 }
      { "category": "lb", "drop_percentage": 50 }
  ]}
 The actual drop percentages applied to the traffic at the clients will be
    "throttle"_drop = 60%
    "lb"_drop = 20%  // 50% of the remaining 'actual' load, which is 40%.
    actual_outgoing_load = 20% // remaining after applying all categories.
 [#not-implemented-hide:]
        repeated .envoy.config.endpoint.v3.ClusterLoadAssignment.Policy.DropOverload drop_overloads = 2;

      • getDropOverloadsOrBuilderList

        List<? extends ClusterLoadAssignment.Policy.DropOverloadOrBuilder> getDropOverloadsOrBuilderList()
         Action to trim the overall incoming traffic to protect the upstream
 hosts. This action allows protection in case the hosts are unable to
 recover from an outage, or unable to autoscale or unable to handle
 incoming traffic volume for any reason.
 At the client each category is applied one after the other to generate
 the 'actual' drop percentage on all outgoing traffic. For example:
 .. code-block:: json
  { "drop_overloads": [
      { "category": "throttle", "drop_percentage": 60 }
      { "category": "lb", "drop_percentage": 50 }
  ]}
 The actual drop percentages applied to the traffic at the clients will be
    "throttle"_drop = 60%
    "lb"_drop = 20%  // 50% of the remaining 'actual' load, which is 40%.
    actual_outgoing_load = 20% // remaining after applying all categories.
 [#not-implemented-hide:]
        repeated .envoy.config.endpoint.v3.ClusterLoadAssignment.Policy.DropOverload drop_overloads = 2;

      • getDropOverloadsOrBuilder

        ClusterLoadAssignment.Policy.DropOverloadOrBuilder getDropOverloadsOrBuilder​(int index)
         Action to trim the overall incoming traffic to protect the upstream
 hosts. This action allows protection in case the hosts are unable to
 recover from an outage, or unable to autoscale or unable to handle
 incoming traffic volume for any reason.
 At the client each category is applied one after the other to generate
 the 'actual' drop percentage on all outgoing traffic. For example:
 .. code-block:: json
  { "drop_overloads": [
      { "category": "throttle", "drop_percentage": 60 }
      { "category": "lb", "drop_percentage": 50 }
  ]}
 The actual drop percentages applied to the traffic at the clients will be
    "throttle"_drop = 60%
    "lb"_drop = 20%  // 50% of the remaining 'actual' load, which is 40%.
    actual_outgoing_load = 20% // remaining after applying all categories.
 [#not-implemented-hide:]
        repeated .envoy.config.endpoint.v3.ClusterLoadAssignment.Policy.DropOverload drop_overloads = 2;

      • hasOverprovisioningFactor

        boolean hasOverprovisioningFactor()
         Priority levels and localities are considered overprovisioned with this
 factor (in percentage). This means that we don't consider a priority
 level or locality unhealthy until the fraction of healthy hosts
 multiplied by the overprovisioning factor drops below 100.
 With the default value 140(1.4), Envoy doesn't consider a priority level
 or a locality unhealthy until their percentage of healthy hosts drops
 below 72%. For example:
 .. code-block:: json
  { "overprovisioning_factor": 100 }
 Read more at :ref:`priority levels <arch_overview_load_balancing_priority_levels>` and
 :ref:`localities <arch_overview_load_balancing_locality_weighted_lb>`.
        .google.protobuf.UInt32Value overprovisioning_factor = 3 [(.validate.rules) = { ... }
        Returns:
        Whether the overprovisioningFactor field is set.

      • getOverprovisioningFactor

        com.google.protobuf.UInt32Value getOverprovisioningFactor()
         Priority levels and localities are considered overprovisioned with this
 factor (in percentage). This means that we don't consider a priority
 level or locality unhealthy until the fraction of healthy hosts
 multiplied by the overprovisioning factor drops below 100.
 With the default value 140(1.4), Envoy doesn't consider a priority level
 or a locality unhealthy until their percentage of healthy hosts drops
 below 72%. For example:
 .. code-block:: json
  { "overprovisioning_factor": 100 }
 Read more at :ref:`priority levels <arch_overview_load_balancing_priority_levels>` and
 :ref:`localities <arch_overview_load_balancing_locality_weighted_lb>`.
        .google.protobuf.UInt32Value overprovisioning_factor = 3 [(.validate.rules) = { ... }
        Returns:
        The overprovisioningFactor.

      • getOverprovisioningFactorOrBuilder

        com.google.protobuf.UInt32ValueOrBuilder getOverprovisioningFactorOrBuilder()
         Priority levels and localities are considered overprovisioned with this
 factor (in percentage). This means that we don't consider a priority
 level or locality unhealthy until the fraction of healthy hosts
 multiplied by the overprovisioning factor drops below 100.
 With the default value 140(1.4), Envoy doesn't consider a priority level
 or a locality unhealthy until their percentage of healthy hosts drops
 below 72%. For example:
 .. code-block:: json
  { "overprovisioning_factor": 100 }
 Read more at :ref:`priority levels <arch_overview_load_balancing_priority_levels>` and
 :ref:`localities <arch_overview_load_balancing_locality_weighted_lb>`.
        .google.protobuf.UInt32Value overprovisioning_factor = 3 [(.validate.rules) = { ... }

      • hasEndpointStaleAfter

        boolean hasEndpointStaleAfter()
         The max time until which the endpoints from this assignment can be used.
 If no new assignments are received before this time expires the endpoints
 are considered stale and should be marked unhealthy.
 Defaults to 0 which means endpoints never go stale.
        .google.protobuf.Duration endpoint_stale_after = 4 [(.validate.rules) = { ... }
        Returns:
        Whether the endpointStaleAfter field is set.

      • getEndpointStaleAfter

        com.google.protobuf.Duration getEndpointStaleAfter()
         The max time until which the endpoints from this assignment can be used.
 If no new assignments are received before this time expires the endpoints
 are considered stale and should be marked unhealthy.
 Defaults to 0 which means endpoints never go stale.
        .google.protobuf.Duration endpoint_stale_after = 4 [(.validate.rules) = { ... }
        Returns:
        The endpointStaleAfter.

      • getEndpointStaleAfterOrBuilder

        com.google.protobuf.DurationOrBuilder getEndpointStaleAfterOrBuilder()
         The max time until which the endpoints from this assignment can be used.
 If no new assignments are received before this time expires the endpoints
 are considered stale and should be marked unhealthy.
 Defaults to 0 which means endpoints never go stale.
        .google.protobuf.Duration endpoint_stale_after = 4 [(.validate.rules) = { ... }