Package io.envoyproxy.envoy.config.rbac.v2

Class Principal.Builder

  • All Implemented Interfaces:
    com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, PrincipalOrBuilder, Cloneable
    Enclosing class:
    Principal
    public static final class Principal.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>
implements PrincipalOrBuilder
     Principal defines an identity or a group of identities for a downstream subject.
 [#next-free-field: 12]
    Protobuf type envoy.config.rbac.v2.Principal

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • clear

        public Principal.Builder clear()
        Specified by:
        clear in interface com.google.protobuf.Message.Builder
        Specified by:
        clear in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clear in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • getDefaultInstanceForType

        public Principal getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public Principal build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public Principal buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • clone

        public Principal.Builder clone()
        Specified by:
        clone in interface com.google.protobuf.Message.Builder
        Specified by:
        clone in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clone in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • setField

        public Principal.Builder setField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                  Object value)
        Specified by:
        setField in interface com.google.protobuf.Message.Builder
        Overrides:
        setField in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • clearField

        public Principal.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        Specified by:
        clearField in interface com.google.protobuf.Message.Builder
        Overrides:
        clearField in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • clearOneof

        public Principal.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        Specified by:
        clearOneof in interface com.google.protobuf.Message.Builder
        Overrides:
        clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • setRepeatedField

        public Principal.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                          int index,
                                          Object value)
        Specified by:
        setRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • addRepeatedField

        public Principal.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                          Object value)
        Specified by:
        addRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • mergeFrom

        public Principal.Builder mergeFrom​(com.google.protobuf.Message other)
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<Principal.Builder>

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • mergeFrom

        public Principal.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                   com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                            throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<Principal.Builder>
        Throws:
        IOException

      • hasAndIds

        public boolean hasAndIds()
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;
        Specified by:
        hasAndIds in interface PrincipalOrBuilder
        Returns:
        Whether the andIds field is set.

      • getAndIds

        public Principal.Set getAndIds()
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;
        Specified by:
        getAndIds in interface PrincipalOrBuilder
        Returns:
        The andIds.

      • setAndIds

        public Principal.Builder setAndIds​(Principal.Set value)
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;

      • setAndIds

        public Principal.Builder setAndIds​(Principal.Set.Builder builderForValue)
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;

      • mergeAndIds

        public Principal.Builder mergeAndIds​(Principal.Set value)
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;

      • clearAndIds

        public Principal.Builder clearAndIds()
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;

      • getAndIdsBuilder

        public Principal.Set.Builder getAndIdsBuilder()
         A set of identifiers that all must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set and_ids = 1;

      • hasOrIds

        public boolean hasOrIds()
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;
        Specified by:
        hasOrIds in interface PrincipalOrBuilder
        Returns:
        Whether the orIds field is set.

      • getOrIds

        public Principal.Set getOrIds()
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;
        Specified by:
        getOrIds in interface PrincipalOrBuilder
        Returns:
        The orIds.

      • setOrIds

        public Principal.Builder setOrIds​(Principal.Set value)
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;

      • setOrIds

        public Principal.Builder setOrIds​(Principal.Set.Builder builderForValue)
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;

      • mergeOrIds

        public Principal.Builder mergeOrIds​(Principal.Set value)
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;

      • clearOrIds

        public Principal.Builder clearOrIds()
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;

      • getOrIdsBuilder

        public Principal.Set.Builder getOrIdsBuilder()
         A set of identifiers at least one must match in order to define the downstream.
        .envoy.config.rbac.v2.Principal.Set or_ids = 2;

      • hasAny

        public boolean hasAny()
         When any is set, it matches any downstream.
        bool any = 3 [(.validate.rules) = { ... }
        Specified by:
        hasAny in interface PrincipalOrBuilder
        Returns:
        Whether the any field is set.

      • getAny

        public boolean getAny()
         When any is set, it matches any downstream.
        bool any = 3 [(.validate.rules) = { ... }
        Specified by:
        getAny in interface PrincipalOrBuilder
        Returns:
        The any.

      • setAny

        public Principal.Builder setAny​(boolean value)
         When any is set, it matches any downstream.
        bool any = 3 [(.validate.rules) = { ... }
        Parameters:
        value - The any to set.
        Returns:
        This builder for chaining.

      • clearAny

        public Principal.Builder clearAny()
         When any is set, it matches any downstream.
        bool any = 3 [(.validate.rules) = { ... }
        Returns:
        This builder for chaining.

      • hasAuthenticated

        public boolean hasAuthenticated()
         Authenticated attributes that identify the downstream.
        .envoy.config.rbac.v2.Principal.Authenticated authenticated = 4;
        Specified by:
        hasAuthenticated in interface PrincipalOrBuilder
        Returns:
        Whether the authenticated field is set.

      • setAuthenticated

        public Principal.Builder setAuthenticated​(Principal.Authenticated value)
         Authenticated attributes that identify the downstream.
        .envoy.config.rbac.v2.Principal.Authenticated authenticated = 4;

      • mergeAuthenticated

        public Principal.Builder mergeAuthenticated​(Principal.Authenticated value)
         Authenticated attributes that identify the downstream.
        .envoy.config.rbac.v2.Principal.Authenticated authenticated = 4;

      • clearAuthenticated

        public Principal.Builder clearAuthenticated()
         Authenticated attributes that identify the downstream.
        .envoy.config.rbac.v2.Principal.Authenticated authenticated = 4;

      • getAuthenticatedBuilder

        public Principal.Authenticated.Builder getAuthenticatedBuilder()
         Authenticated attributes that identify the downstream.
        .envoy.config.rbac.v2.Principal.Authenticated authenticated = 4;

      • hasSourceIp

        @Deprecated
public boolean hasSourceIp()
        Deprecated.
        envoy.config.rbac.v2.Principal.source_ip is deprecated. See envoy/config/rbac/v2/rbac.proto;l=208
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];
        Specified by:
        hasSourceIp in interface PrincipalOrBuilder
        Returns:
        Whether the sourceIp field is set.

      • getSourceIp

        @Deprecated
public CidrRange getSourceIp()
        Deprecated.
        envoy.config.rbac.v2.Principal.source_ip is deprecated. See envoy/config/rbac/v2/rbac.proto;l=208
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];
        Specified by:
        getSourceIp in interface PrincipalOrBuilder
        Returns:
        The sourceIp.

      • setSourceIp

        @Deprecated
public Principal.Builder setSourceIp​(CidrRange value)
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];

      • setSourceIp

        @Deprecated
public Principal.Builder setSourceIp​(CidrRange.Builder builderForValue)
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];

      • mergeSourceIp

        @Deprecated
public Principal.Builder mergeSourceIp​(CidrRange value)
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];

      • clearSourceIp

        @Deprecated
public Principal.Builder clearSourceIp()
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];

      • getSourceIpBuilder

        @Deprecated
public CidrRange.Builder getSourceIpBuilder()
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];

      • getSourceIpOrBuilder

        @Deprecated
public CidrRangeOrBuilder getSourceIpOrBuilder()
        Deprecated.
         A CIDR block that describes the downstream IP.
 This address will honor proxy protocol, but will not honor XFF.
        .envoy.api.v2.core.CidrRange source_ip = 5 [deprecated = true];
        Specified by:
        getSourceIpOrBuilder in interface PrincipalOrBuilder

      • hasDirectRemoteIp

        public boolean hasDirectRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;
        Specified by:
        hasDirectRemoteIp in interface PrincipalOrBuilder
        Returns:
        Whether the directRemoteIp field is set.

      • getDirectRemoteIp

        public CidrRange getDirectRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;
        Specified by:
        getDirectRemoteIp in interface PrincipalOrBuilder
        Returns:
        The directRemoteIp.

      • setDirectRemoteIp

        public Principal.Builder setDirectRemoteIp​(CidrRange value)
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;

      • setDirectRemoteIp

        public Principal.Builder setDirectRemoteIp​(CidrRange.Builder builderForValue)
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;

      • mergeDirectRemoteIp

        public Principal.Builder mergeDirectRemoteIp​(CidrRange value)
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;

      • clearDirectRemoteIp

        public Principal.Builder clearDirectRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;

      • getDirectRemoteIpBuilder

        public CidrRange.Builder getDirectRemoteIpBuilder()
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;

      • getDirectRemoteIpOrBuilder

        public CidrRangeOrBuilder getDirectRemoteIpOrBuilder()
         A CIDR block that describes the downstream remote/origin address.
 Note: This is always the physical peer even if the
 :ref:`remote_ip <envoy_api_field_config.rbac.v2.Principal.remote_ip>` is inferred
 from for example the x-forwarder-for header, proxy protocol, etc.
        .envoy.api.v2.core.CidrRange direct_remote_ip = 10;
        Specified by:
        getDirectRemoteIpOrBuilder in interface PrincipalOrBuilder

      • hasRemoteIp

        public boolean hasRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;
        Specified by:
        hasRemoteIp in interface PrincipalOrBuilder
        Returns:
        Whether the remoteIp field is set.

      • getRemoteIp

        public CidrRange getRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;
        Specified by:
        getRemoteIp in interface PrincipalOrBuilder
        Returns:
        The remoteIp.

      • setRemoteIp

        public Principal.Builder setRemoteIp​(CidrRange value)
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;

      • setRemoteIp

        public Principal.Builder setRemoteIp​(CidrRange.Builder builderForValue)
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;

      • mergeRemoteIp

        public Principal.Builder mergeRemoteIp​(CidrRange value)
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;

      • clearRemoteIp

        public Principal.Builder clearRemoteIp()
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;

      • getRemoteIpBuilder

        public CidrRange.Builder getRemoteIpBuilder()
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;

      • getRemoteIpOrBuilder

        public CidrRangeOrBuilder getRemoteIpOrBuilder()
         A CIDR block that describes the downstream remote/origin address.
 Note: This may not be the physical peer and could be different from the
 :ref:`direct_remote_ip <envoy_api_field_config.rbac.v2.Principal.direct_remote_ip>`.
 E.g, if the remote ip is inferred from for example the x-forwarder-for header,
 proxy protocol, etc.
        .envoy.api.v2.core.CidrRange remote_ip = 11;
        Specified by:
        getRemoteIpOrBuilder in interface PrincipalOrBuilder

      • hasHeader

        public boolean hasHeader()
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;
        Specified by:
        hasHeader in interface PrincipalOrBuilder
        Returns:
        Whether the header field is set.

      • getHeader

        public HeaderMatcher getHeader()
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;
        Specified by:
        getHeader in interface PrincipalOrBuilder
        Returns:
        The header.

      • setHeader

        public Principal.Builder setHeader​(HeaderMatcher value)
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;

      • setHeader

        public Principal.Builder setHeader​(HeaderMatcher.Builder builderForValue)
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;

      • mergeHeader

        public Principal.Builder mergeHeader​(HeaderMatcher value)
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;

      • clearHeader

        public Principal.Builder clearHeader()
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;

      • getHeaderBuilder

        public HeaderMatcher.Builder getHeaderBuilder()
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;

      • getHeaderOrBuilder

        public HeaderMatcherOrBuilder getHeaderOrBuilder()
         A header (or pseudo-header such as :path or :method) on the incoming HTTP request. Only
 available for HTTP request.
 Note: the pseudo-header :path includes the query and fragment string. Use the `url_path`
 field if you want to match the URL path without the query and fragment string.
        .envoy.api.v2.route.HeaderMatcher header = 6;
        Specified by:
        getHeaderOrBuilder in interface PrincipalOrBuilder

      • hasUrlPath

        public boolean hasUrlPath()
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;
        Specified by:
        hasUrlPath in interface PrincipalOrBuilder
        Returns:
        Whether the urlPath field is set.

      • getUrlPath

        public PathMatcher getUrlPath()
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;
        Specified by:
        getUrlPath in interface PrincipalOrBuilder
        Returns:
        The urlPath.

      • setUrlPath

        public Principal.Builder setUrlPath​(PathMatcher value)
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;

      • setUrlPath

        public Principal.Builder setUrlPath​(PathMatcher.Builder builderForValue)
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;

      • mergeUrlPath

        public Principal.Builder mergeUrlPath​(PathMatcher value)
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;

      • clearUrlPath

        public Principal.Builder clearUrlPath()
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;

      • getUrlPathBuilder

        public PathMatcher.Builder getUrlPathBuilder()
         A URL path on the incoming HTTP request. Only available for HTTP.
        .envoy.type.matcher.PathMatcher url_path = 9;

      • hasMetadata

        public boolean hasMetadata()
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;
        Specified by:
        hasMetadata in interface PrincipalOrBuilder
        Returns:
        Whether the metadata field is set.

      • getMetadata

        public MetadataMatcher getMetadata()
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;
        Specified by:
        getMetadata in interface PrincipalOrBuilder
        Returns:
        The metadata.

      • setMetadata

        public Principal.Builder setMetadata​(MetadataMatcher value)
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;

      • setMetadata

        public Principal.Builder setMetadata​(MetadataMatcher.Builder builderForValue)
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;

      • mergeMetadata

        public Principal.Builder mergeMetadata​(MetadataMatcher value)
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;

      • clearMetadata

        public Principal.Builder clearMetadata()
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;

      • getMetadataBuilder

        public MetadataMatcher.Builder getMetadataBuilder()
         Metadata that describes additional information about the principal.
        .envoy.type.matcher.MetadataMatcher metadata = 7;

      • hasNotId

        public boolean hasNotId()
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;
        Specified by:
        hasNotId in interface PrincipalOrBuilder
        Returns:
        Whether the notId field is set.

      • getNotId

        public Principal getNotId()
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;
        Specified by:
        getNotId in interface PrincipalOrBuilder
        Returns:
        The notId.

      • setNotId

        public Principal.Builder setNotId​(Principal value)
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;

      • setNotId

        public Principal.Builder setNotId​(Principal.Builder builderForValue)
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;

      • mergeNotId

        public Principal.Builder mergeNotId​(Principal value)
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;

      • clearNotId

        public Principal.Builder clearNotId()
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;

      • getNotIdBuilder

        public Principal.Builder getNotIdBuilder()
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;

      • getNotIdOrBuilder

        public PrincipalOrBuilder getNotIdOrBuilder()
         Negates matching the provided principal. For instance, if the value of `not_id` would match,
 this principal would not match. Conversely, if the value of `not_id` would not match, this
 principal would match.
        .envoy.config.rbac.v2.Principal not_id = 8;
        Specified by:
        getNotIdOrBuilder in interface PrincipalOrBuilder

      • setUnknownFields

        public final Principal.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>

      • mergeUnknownFields

        public final Principal.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<Principal.Builder>