Package io.envoyproxy.envoy.config.route.v3

Class RateLimit.Action.HeaderValueMatch.Builder

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<RateLimit.Action.HeaderValueMatch.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<RateLimit.Action.HeaderValueMatch.Builder>

      • getDefaultInstanceForType

        public RateLimit.Action.HeaderValueMatch getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public RateLimit.Action.HeaderValueMatch build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public RateLimit.Action.HeaderValueMatch buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<RateLimit.Action.HeaderValueMatch.Builder>

      • getDescriptorKeyBytes

        public com.google.protobuf.ByteString getDescriptorKeyBytes()
         The key to use in the descriptor entry. Defaults to ``header_match``.
        string descriptor_key = 4;
        Specified by:
        getDescriptorKeyBytes in interface RateLimit.Action.HeaderValueMatchOrBuilder
        Returns:
        The bytes for descriptorKey.

      • setDescriptorKey

        public RateLimit.Action.HeaderValueMatch.Builder setDescriptorKey​(String value)
         The key to use in the descriptor entry. Defaults to ``header_match``.
        string descriptor_key = 4;
        Parameters:
        value - The descriptorKey to set.
        Returns:
        This builder for chaining.

      • clearDescriptorKey

        public RateLimit.Action.HeaderValueMatch.Builder clearDescriptorKey()
         The key to use in the descriptor entry. Defaults to ``header_match``.
        string descriptor_key = 4;
        Returns:
        This builder for chaining.

      • setDescriptorKeyBytes

        public RateLimit.Action.HeaderValueMatch.Builder setDescriptorKeyBytes​(com.google.protobuf.ByteString value)
         The key to use in the descriptor entry. Defaults to ``header_match``.
        string descriptor_key = 4;
        Parameters:
        value - The bytes for descriptorKey to set.
        Returns:
        This builder for chaining.

      • getDescriptorValueBytes

        public com.google.protobuf.ByteString getDescriptorValueBytes()
         The value to use in the descriptor entry.
        string descriptor_value = 1 [(.validate.rules) = { ... }
        Specified by:
        getDescriptorValueBytes in interface RateLimit.Action.HeaderValueMatchOrBuilder
        Returns:
        The bytes for descriptorValue.

      • setDescriptorValue

        public RateLimit.Action.HeaderValueMatch.Builder setDescriptorValue​(String value)
         The value to use in the descriptor entry.
        string descriptor_value = 1 [(.validate.rules) = { ... }
        Parameters:
        value - The descriptorValue to set.
        Returns:
        This builder for chaining.

      • clearDescriptorValue

        public RateLimit.Action.HeaderValueMatch.Builder clearDescriptorValue()
         The value to use in the descriptor entry.
        string descriptor_value = 1 [(.validate.rules) = { ... }
        Returns:
        This builder for chaining.

      • setDescriptorValueBytes

        public RateLimit.Action.HeaderValueMatch.Builder setDescriptorValueBytes​(com.google.protobuf.ByteString value)
         The value to use in the descriptor entry.
        string descriptor_value = 1 [(.validate.rules) = { ... }
        Parameters:
        value - The bytes for descriptorValue to set.
        Returns:
        This builder for chaining.

      • hasExpectMatch

        public boolean hasExpectMatch()
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;
        Specified by:
        hasExpectMatch in interface RateLimit.Action.HeaderValueMatchOrBuilder
        Returns:
        Whether the expectMatch field is set.

      • getExpectMatch

        public com.google.protobuf.BoolValue getExpectMatch()
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;
        Specified by:
        getExpectMatch in interface RateLimit.Action.HeaderValueMatchOrBuilder
        Returns:
        The expectMatch.

      • setExpectMatch

        public RateLimit.Action.HeaderValueMatch.Builder setExpectMatch​(com.google.protobuf.BoolValue value)
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;

      • setExpectMatch

        public RateLimit.Action.HeaderValueMatch.Builder setExpectMatch​(com.google.protobuf.BoolValue.Builder builderForValue)
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;

      • mergeExpectMatch

        public RateLimit.Action.HeaderValueMatch.Builder mergeExpectMatch​(com.google.protobuf.BoolValue value)
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;

      • clearExpectMatch

        public RateLimit.Action.HeaderValueMatch.Builder clearExpectMatch()
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;

      • getExpectMatchBuilder

        public com.google.protobuf.BoolValue.Builder getExpectMatchBuilder()
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;

      • getExpectMatchOrBuilder

        public com.google.protobuf.BoolValueOrBuilder getExpectMatchOrBuilder()
         If set to true, the action will append a descriptor entry when the
 request matches the headers. If set to false, the action will append a
 descriptor entry when the request does not match the headers. The
 default value is true.
        .google.protobuf.BoolValue expect_match = 2;
        Specified by:
        getExpectMatchOrBuilder in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • getHeadersList

        public List<HeaderMatcher> getHeadersList()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }
        Specified by:
        getHeadersList in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • getHeadersCount

        public int getHeadersCount()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }
        Specified by:
        getHeadersCount in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • getHeaders

        public HeaderMatcher getHeaders​(int index)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }
        Specified by:
        getHeaders in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • setHeaders

        public RateLimit.Action.HeaderValueMatch.Builder setHeaders​(int index,
                                                            HeaderMatcher value)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • setHeaders

        public RateLimit.Action.HeaderValueMatch.Builder setHeaders​(int index,
                                                            HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addHeaders

        public RateLimit.Action.HeaderValueMatch.Builder addHeaders​(HeaderMatcher value)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addHeaders

        public RateLimit.Action.HeaderValueMatch.Builder addHeaders​(int index,
                                                            HeaderMatcher value)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addHeaders

        public RateLimit.Action.HeaderValueMatch.Builder addHeaders​(HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addHeaders

        public RateLimit.Action.HeaderValueMatch.Builder addHeaders​(int index,
                                                            HeaderMatcher.Builder builderForValue)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addAllHeaders

        public RateLimit.Action.HeaderValueMatch.Builder addAllHeaders​(Iterable<? extends HeaderMatcher> values)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • clearHeaders

        public RateLimit.Action.HeaderValueMatch.Builder clearHeaders()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • removeHeaders

        public RateLimit.Action.HeaderValueMatch.Builder removeHeaders​(int index)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • getHeadersBuilder

        public HeaderMatcher.Builder getHeadersBuilder​(int index)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • getHeadersOrBuilder

        public HeaderMatcherOrBuilder getHeadersOrBuilder​(int index)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }
        Specified by:
        getHeadersOrBuilder in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • getHeadersOrBuilderList

        public List<? extends HeaderMatcherOrBuilder> getHeadersOrBuilderList()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }
        Specified by:
        getHeadersOrBuilderList in interface RateLimit.Action.HeaderValueMatchOrBuilder

      • addHeadersBuilder

        public HeaderMatcher.Builder addHeadersBuilder()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • addHeadersBuilder

        public HeaderMatcher.Builder addHeadersBuilder​(int index)
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }

      • getHeadersBuilderList

        public List<HeaderMatcher.Builder> getHeadersBuilderList()
         Specifies a set of headers that the rate limit action should match
 on. The action will check the request’s headers against all the
 specified headers in the config. A match will happen if all the
 headers in the config are present in the request with the same values
 (or based on presence if the value field is not in the config).
        repeated .envoy.config.route.v3.HeaderMatcher headers = 3 [(.validate.rules) = { ... }